Orari: 07-23 tutti i giorni

Database DTC TuningBot · v4.37.15

P1347 VAG - Codice di errore diagnostico (2 interpretazioni)

Interpretazione specifica del costruttore per VAG. Tutte le interpretazioni di P1347

P · PowertrainEngineOBD2

Cosa significa P1347

P1347
Camshaft position (CMP) sensor 2/Bank 2/ crankshaft position (CKP) sensor - out of sequence VAG · engine Affidabilità del dato 62%

The control module detected a fault associated with the Camshaft position (CMP) sensor 2/Bank 2/ crankshaft position (CKP) sensor - out of sequence circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Audi.

Possibili cause

  • Valve timing
  • CKP/CMP sensor installation
  • CKP sensor rotor
Si applica a Audi
P1347
Camshaft Position Sensor 2 (G163) / Engine Speed Sensor (G28): Incor. Correl VAG · engine Affidabilità del dato 80%

The control module detected a fault associated with the Camshaft Position Sensor 2 (G163) / Engine Speed Sensor (G28): Incor. Correl circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17755. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Possibili cause

  • Timing Belt/Chain incorrectly installed
  • Camshaft Position Sensor 2 (G163) faulty
  • Engine Speed Sensor (G28) faulty

Controlli consigliati

  • Check Timing Belt/Chain installation
  • Check/Replace Camshaft Position Sensor 2 (G163)
  • Check/Replace Engine Speed Sensor (G28)
Si applica a Volkswagen

Codici correlati e vicini

Come si legge P1347

P

Powertrain: motore, cambio e trasmissione.

1

Gamma definita dal costruttore: il significato può cambiare tra marche.

347

Indice specifico del guasto dentro il sottosistema.

Domande frequenti su P1347

Cosa significa P1347?

Codice di errore diagnostico (2 interpretazioni). The control module detected a fault associated with the Camshaft position (CMP) sensor 2/Bank 2/ crankshaft position (CKP) sensor - out of sequence circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Audi.

P1347 è generico o specifico del costruttore?

P1347 è un codice specifico del costruttore. In questo database è documentato per: VAG. Lo stesso numero può significare altro su altre marche.

TuningBot può rimuovere P1347 a livello di file?

Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore. La correzione del checksum non è inclusa: è un servizio a parte, opzionale. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.

Altri servizi sul file

RimappaturaRisultati Stage 1 al banco per i motori VAG Vedi i risultati →

← Cerca in tutto il database DTC