Crankshaft position (CKP) sensor/camshaft position (CMP) sensor 2, bank 1 range/performance
Dodge · engine
Affidabilità del dato62%
The control module judged the Crankshaft position (CKP) sensor/camshaft position (CMP) sensor 2, bank 1 behaviour implausible for the current operating conditions. This is the manufacturer-specific definition used by Dodge.
Injector Control Pressure System Fault
Ford · fuel
Affidabilità del dato80%
The control module registered the fault condition described as "Injector Control Pressure System Fault". This is the manufacturer-specific definition used by Ford.
Petrol high pressure regulation fault : Fuel pressure too high (High stop )
PSA · fuel
Affidabilità del dato72%
The control module detected that the Petrol high pressure regulation fault was above its expected limit. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Si applica aPeugeotBosch MED 17.4.x engine ECU (EP6 THP family)
Intake Valves For Cylinder Shut Off Short Circuit To Ground
VAG · engine
Affidabilità del dato62%
The control module detected a short circuit to ground in the Intake Valves For Cylinder Shut Off circuit. This is the manufacturer-specific definition used by Audi.
Possibili cause
Wiring short to ground
valve controller
Controlli consigliati
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Si applica aAudi
P1209
Intake Valves For Cylinder Shut Off Short Circuit To Ground
VAG · engine
Affidabilità del dato80%
The control module detected a short circuit to ground in the Intake Valves For Cylinder Shut Off circuit. This is the manufacturer-specific definition used by Volkswagen.
Gamma definita dal costruttore: il significato può cambiare tra marche.
209
Indice specifico del guasto dentro il sottosistema.
Domande frequenti su P1209
Cosa significa P1209?
Codice di errore diagnostico (5 interpretazioni). The control module judged the Crankshaft position (CKP) sensor/camshaft position (CMP) sensor 2, bank 1 behaviour implausible for the current operating conditions. This is the manufacturer-specific definition used by Dodge.
P1209 è generico o specifico del costruttore?
P1209 è un codice specifico del costruttore. In questo database è documentato per: Dodge, Ford, PSA, VAG. Lo stesso numero può significare altro su altre marche.
TuningBot può rimuovere P1209 a livello di file?
Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore. La correzione del checksum non è inclusa: è un servizio a parte, opzionale. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.