Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.14

U3000 Código de avería diagnóstico (6 variantes)

Interpretación genérica (OBD-II) + 2 específicas del fabricante en la base de datos DTC de TuningBot.

U · RedNetworkOBD2
Páginas por marca:FordLand Rover

Interpretación genérica (OBD-II)

U3000
Control Module Genérico · network Fiabilidad del dato 78%

The control module detected a fault associated with the Control Module circuit or function; the stored code identifies the affected component rather than a single failure mode.

Síntomas

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Posibles causas

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Comprobaciones recomendadas

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Interpretaciones específicas del fabricante

Ford

6 interpretaciones
U3000:41
Control Module — General Checksum Failure Ford · software Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 41, general checksum failure. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:46
Control Module — Calibration or Parameter Memory Failure Ford · steering Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 46, calibration or parameter memory failure. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:49
Control Module — Internal Electronic Failure Ford · steering Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 49, internal electronic failure. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:61
Control Module — Signal Calculation Failure Ford · steering Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 61, signal calculation failure. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:72
Control Module — Actuator Stuck Open Ford · steering Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 72, actuator stuck open. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:96
Control Module — Component Internal Failure Ford · steering Fiabilidad del dato 96%

The Ford Explorer PSCM detected control module with failure type 96, component internal failure. This interpretation is specific to the documented EPAS controller and model years.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Se aplica a Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)

Land Rover

1 interpretación
U3000:49
Control module (ECU) faulted — Internal Electronic Failure Land Rover · body Fiabilidad del dato 95%

The L405 Deployable Side Step ECU detected control module (ecu) faulted with failure type 49, internal electronic failure. This interpretation is limited to the documented DSS controller.

Comprobaciones recomendadas

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Se aplica a Range Rover L405 2013 model year Deployable Side Step (DSS) ECU

Códigos relacionados y cercanos

Cómo se lee U3000

U

Red: comunicación entre centralitas.

3

Código genérico estándar SAE: mismo significado en cualquier marca.

000

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre U3000

¿Qué significa U3000?

Código de avería diagnóstico (6 variantes). The control module detected a fault associated with the Control Module circuit or function; the stored code identifies the affected component rather than a single failure mode.

¿U3000 es genérico o específico del fabricante?

U3000 existe tanto como código genérico OBD-II (mismo significado en cualquier marca) como con 2 interpretaciones específicas del fabricante: Ford, Land Rover. Léelo siempre en el contexto de tu vehículo.

¿Puede TuningBot eliminar U3000 a nivel de archivo?

No garantizado. Los códigos powertrain (P) se pueden desactivar de forma fiable en la calibración de la ECU, pero los de carrocería, chasis y red dependen de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si U3000 se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC