Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

U3000 Diagnose-Fehlercode (6 Varianten)

Generische (OBD-II) Interpretation + 2 herstellerspezifische in der TuningBot DTC-Datenbank.

U · NetzwerkNetworkOBD2
Markenseiten:FordLand Rover

Generische (OBD-II) Interpretation

U3000
Control Module Generisch · network Datenzuverlässigkeit 78%

The control module detected a fault associated with the Control Module circuit or function; the stored code identifies the affected component rather than a single failure mode.

Symptome

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Mögliche Ursachen

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Empfohlene Prüfungen

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Herstellerspezifische Interpretationen

Ford

6 Interpretationen
U3000:41
Control Module — General Checksum Failure Ford · software Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 41, general checksum failure. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:46
Control Module — Calibration or Parameter Memory Failure Ford · steering Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 46, calibration or parameter memory failure. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:49
Control Module — Internal Electronic Failure Ford · steering Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 49, internal electronic failure. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:61
Control Module — Signal Calculation Failure Ford · steering Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 61, signal calculation failure. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:72
Control Module — Actuator Stuck Open Ford · steering Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 72, actuator stuck open. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)
U3000:96
Control Module — Component Internal Failure Ford · steering Datenzuverlässigkeit 96%

The Ford Explorer PSCM detected control module with failure type 96, component internal failure. This interpretation is specific to the documented EPAS controller and model years.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage and PSCM power supplies
  • Inspect EPAS wiring and connectors
  • Review PSCM snapshot and extended data
  • Follow the Ford EPAS diagnostic procedure
Gilt für Ford Explorer 2011-2012 Power Steering Control Module (PSCM)|Electric Power Assisted Steering (EPAS)

Land Rover

1 Interpretation
U3000:49
Control module (ECU) faulted — Internal Electronic Failure Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected control module (ecu) faulted with failure type 49, internal electronic failure. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU

Verwandte und benachbarte Codes

So liest man U3000

U

Netzwerk: Kommunikation zwischen Steuergeräten.

3

Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.

000

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu U3000

Was bedeutet U3000?

Diagnose-Fehlercode (6 Varianten). The control module detected a fault associated with the Control Module circuit or function; the stored code identifies the affected component rather than a single failure mode.

Ist U3000 generisch oder herstellerspezifisch?

U3000 existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 2 herstellerspezifischen Interpretationen: Ford, Land Rover. Immer im Kontext Ihres Fahrzeugs lesen.

Kann TuningBot U3000 auf Dateiebene entfernen?

Nicht garantiert. Powertrain-Codes (P) lassen sich zuverlässig in der Kalibrierung deaktivieren, Body-, Fahrwerk- und Netzwerkcodes hängen dagegen vom konkreten Steuergerät und von der Umsetzung des Fehlers ab - manche gehen, manche nicht. Fordern Sie ein Angebot an, und unsere Ingenieure prüfen Ihre Datei und sagen Ihnen kostenlos, ob U3000 in Ihrem Fall entfernbar ist.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen