Base de datos DTC de TuningBot · v4.37.15
8 interpretaciones específicas del fabricante en 5 fabricantes, en la base de datos DTC de TuningBot.
HyundaiThe control module detected a fault associated with the Unused Power Stage C circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
MazdaThe control module detected improper operation of the CAN data bus. This is the manufacturer-specific definition used by Mazda.
PSAThe control module detected that the expected Engine status signal fault was absent. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected that the expected Engine status signal fault was absent. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected an interruption (open circuit) in the Engine running status information line circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected an interruption (open circuit) in the Engine running information circuit. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected a short circuit to battery voltage in the AC signal circuit. This is the manufacturer-specific definition used by Audi.
Wiring
VolvoThe control module detected that the Electronic throttle system (ETS), MIL request OFF signal stayed below the expected range. This is the manufacturer-specific definition used by Volvo.
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (8 interpretaciones). The control module detected a fault associated with the Unused Power Stage C circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
P1657 es un código específico del fabricante. En esta base de datos está documentado para: Hyundai, Mazda, PSA, VAG, Volvo. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Estrategia de diagnóstico y lógica DTC
EnglishEN
ItalianoIT
DeutschDE
PortuguêsPT
FrançaisFR
РусскийRU