Base de datos DTC de TuningBot · v4.37.14
Interpretación específica del fabricante para PSA. Todas las interpretaciones de P1621
The stored code identifies a fault of the ECU internal fault. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the ECU internal fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected the fault condition "Software redundancy fault at the injection (Level 2)" for the ECU. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Software redundancy fault at the injection. (trim level 2)" for the ECU. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The stored code identifies a fault of the ECU fault. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected the fault condition "Safety" for the System fault. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "internal fault" for the Engine ECU. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (7 interpretaciones). The stored code identifies a fault of the ECU internal fault. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
P1621 es un código específico del fabricante. En esta base de datos está documentado para: PSA. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta y, si la ECU lo requiere, corrige también el checksum. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Estrategia de diagnóstico y lógica DTC
EnglishEN
ItalianoIT
DeutschDE
PortuguêsPT
FrançaisFR
РусскийRU