Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.38.5

02818 VAG - Electronic Steering Column Lock Enabling for Electronic Ignition Lock

Interpretación específica del fabricante para VAG. Todas las interpretaciones de 02818

SteeringOEM

Qué significa 02818

02818
Electronic Steering Column Lock Enabling for Electronic Ignition Lock VAG · steering Fiabilidad del dato 80%

The control module detected a fault associated with the Electronic Steering Column Lock Enabling for Electronic Ignition Lock circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Open or Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Síntomas

  • Electronic Steering Column Lock not working
  • Engine not starting

Posibles causas

Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty

Comprobaciones recomendadas

Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)

Se aplica a Volkswagen

Códigos relacionados y cercanos

Preguntas frecuentes sobre 02818

¿Qué significa 02818?

Electronic Steering Column Lock Enabling for Electronic Ignition Lock. The control module detected a fault associated with the Electronic Steering Column Lock Enabling for Electronic Ignition Lock circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Open or Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

¿02818 es genérico o específico del fabricante?

02818 es un código específico del fabricante. En esta base de datos está documentado para: VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar 02818 a nivel de archivo?

No garantizado. 02818 es un código específico del fabricante en formato OEM, así que la posibilidad de eliminarlo depende de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si 02818 se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores VAG Ver los resultados →

← Buscar en toda la base de datos DTC