The control module detected improper operation of the A/C Compressor Input. This is the manufacturer-specific definition used by Hyundai.
TuningBot DTC Database · v4.37.14
P1458 Diagnostic Trouble Code (5 interpretations)
5 manufacturer-specific interpretations across 4 manufacturers in the TuningBot DTC database.
Hyundai
1 interpretation
Mazda
1 interpretationThe control module registered the fault condition described as "A/C Compressor Clutch Signal Fault". This is the manufacturer-specific definition used by Mazda.
Porsche
1 interpretationThe control module detected a fault associated with the A/C Compressor Signal circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.
VAG
2 interpretationsThe control module detected a short circuit to ground in the Exhaust gas recirculation temperature (EGRT) sensor 2/Bank 2 circuit. This is the manufacturer-specific definition used by Audi.
Possible causes
- Wiring short to ground
- EGRT sensor
The control module detected a short circuit to ground in the Exhaust Gas Temp Sensor 2 (G236) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17866. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Symptoms
Malfunction Indicator Light (MIL) ON
Possible causes
- Wiring and/or Connector(s) from/to Exhaust Gas Temperature Sensor 2 (G236) faulty
- Exhaust Gas Temperature Sensor 2 (G236) faulty
Recommended checks
- Check Wiring and/or Connector(s) from/to Exhaust Gas Temperature Sensor 2 (G236)
- Check/Replace Exhaust Gas Temperature Sensor 2 (G236)
Related and nearby codes
How to read P1458
Powertrain: engine, transmission and driveline systems.
Manufacturer-defined range: the meaning can differ between brands.
Specific fault index within the subsystem.
Frequently asked questions about P1458
What does P1458 mean?
Diagnostic Trouble Code (5 interpretations). The control module detected improper operation of the A/C Compressor Input. This is the manufacturer-specific definition used by Hyundai.
Is P1458 generic or manufacturer-specific?
P1458 is a manufacturer-specific code. In this database it is documented for: Hyundai, Mazda, Porsche, VAG. The same number can mean something different on other brands.
Can TuningBot remove P1458 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Other file services
Understand the system behind this code: EGR System
