Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.15

P1364 VAG - Diagnostic Trouble Code (2 interpretations)

Manufacturer-specific interpretation for VAG. All interpretations of P1364

P · PowertrainIgnitionOBD2

What P1364 means

P1364
Ignition coil/amplifier, cylinder 4 - open circuit VAG · ignition Data confidence 62%

The control module detected an interruption (open circuit) in the Ignition coil/amplifier, cylinder 4 circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.

Possible causes

  • Wiring open circuit
  • ignition coil/ amplifier
Applies to Audi
P1364
Cylinder 4 Ignition Circuit: Open Circuit VAG · engine Data confidence 88%

The control module detected an interruption (open circuit) in the Cylinder 4 Ignition circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17772. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Misfire
  • No Spark

Possible causes

  • Faulty Ignition coil(s) with output stage
  • Fuse(s) faulty
  • Wiring and/or Connector(s) from coil(s) to ECM faulty

Recommended checks

  • Check/Replace Coil(s)
  • Check Fuse(s)
  • Check Wiring and/or Connector(s)
Applies to Volkswagen

Related and nearby codes

P13 range
P1300P1301P1302P1303P1304P1305P1306P1307P1308P1309P130AP130DP1310P1311P1312P1313P1314P1315

How to read P1364

P

Powertrain: engine, transmission and driveline systems.

1

Manufacturer-defined range: the meaning can differ between brands.

364

Specific fault index within the subsystem.

Frequently asked questions about P1364

What does P1364 mean?

Diagnostic Trouble Code (2 interpretations). The control module detected an interruption (open circuit) in the Ignition coil/amplifier, cylinder 4 circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.

Is P1364 generic or manufacturer-specific?

P1364 is a manufacturer-specific code. In this database it is documented for: VAG. The same number can mean something different on other brands.

Can TuningBot remove P1364 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Diagnostic Strategy and DTC Logic

ECU tuningStage 1 dyno results for VAG engines See the results →

← Search the full DTC database