Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1708 Diagnose-Fehlercode (4 Interpretationen)

4 herstellerspezifische Interpretationen bei 3 Herstellern in der TuningBot DTC-Datenbank.

P · AntriebsstrangEngineOBD2

Hyundai

1 Interpretation
P1708
Accel Switch Hyundai · engine Datenzuverlässigkeit 62%

The control module detected a fault associated with the Accel Switch circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Land Rover

1 Interpretation
P1708
Transfer box link - signal line Land Rover · engine Datenzuverlässigkeit 62%

The control module detected a fault associated with the Transfer box link - signal line circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Land Rover.

Mögliche Ursachen

Wiring short circuit to ground

PSA

2 Interpretationen
P1708
Gear lever signal fault : Short circuit to earth PSA · engine Datenzuverlässigkeit 72%

The control module detected a short circuit to ground in the Gear lever signal fault circuit. Documented for the Automated manual gearbox electric control ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Automated manual gearbox electric control ECU
P1708
Gear lever signal fault : Short circuit to earth PSA · engine Datenzuverlässigkeit 72%

The control module detected a short circuit to ground in the Gear lever signal fault circuit. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot MCP 6-speed piloted manual gearbox ECU

Verwandte und benachbarte Codes

So liest man P1708

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

708

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1708

Was bedeutet P1708?

Diagnose-Fehlercode (4 Interpretationen). The control module detected a fault associated with the Accel Switch circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Ist P1708 generisch oder herstellerspezifisch?

P1708 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Hyundai, Land Rover, PSA. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1708 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen