ECU Services Update July 2026: 840+ ECU-Lösungen

ECU services update · July 2026

ECU Services Update July 2026:
840+ New & Improved Solutions

The July 2026 TuningBot update expands ECU-Serviceabdeckung with a strong focus on practical workshop requests: AdBlue/SCR-Entfernung, DPF-Entfernung, AGR-Entfernung, DTC-Entfernung, GPF/OPF, Lambda/O2, Start/Stopp, Readiness und torque-related Arbeitsabläufe.

This release introduces new supported ECU-service combinations and reworks hundreds of existing variants. The main direction is simple: broader compatibility, better diagnostic handling and more stable file processing for real-world professional ECU work.

840+

Neu & verbessert

50+

New additions

790+

Reworked variants

Schwerpunkt: wider ECU-service coverage and workshop-ready stability across modern diesel, petrol, truck and off-highway platforms.

Aktualisierte Steuergerätesteuerungen durchsuchen →

Support vor der Bestellung prüfen: ECU-Service-Abdeckung

This update is designed for daily workshop use: broader ECU compatibility, more complete service recognition, practical hardware notes and improved stability across supported vehicle applications.

ECU Services Update July 2026 at a glance

July 2026 coverage

July 2026 service-database expansion with new and improved ECU-service combinations.

Diesel and aftertreatment focus

AdBlue/SCR, DPF, AGR, DTC and torque-monitoring workflows on selected supported ECUs.

Petrol workflow focus

GPF/OPF, Lambda/O2, EVAP, exhaust flap, swirl flap, AGS and sound-related service coverage.

Truck and off-highway focus

Additional coverage for selected truck, agricultural, construction, industrial and utility applications.

The purpose is not only to add more entries, but also to improve reliability on existing supported solutions: cleaner switches, stronger compatibility and better file-specific processing consistency.

Major new ECU service additions

The July update adds important new coverage for selected modern ECU families across passenger cars, trucks, off-highway equipment and emerging vehicle brands. Below are the most relevant additions for professional file-service work.

FORD · BOSCH MG1CS036

New GPF/OPF/PPF support for selected files, with sensor-preparation notes where required.

VAG · BOSCH MG1CS164

New support across selected AGS, DTC, Lambda/O2, exhaust flap und flaps/swirl Arbeitsabläufe.

VOLKSWAGEN TRUCKS · BOSCH MD1CE100

Added selected AdBlue/SCR, DTC und AGR service workflows for truck applications.

WEIDEMANN · BOSCH MD1CC878

Added selected AdBlue/SCR, DTC, AGR, Heißer Start und Readiness support.

HYUNDAI / KIA · KEFICO CPGPSH3.26.1

New Burbles Activation support for selected supported petrol applications.

NISSAN / VAUXHALL · BOSCH MD1CS016 / MD1CS199

Expanded selected DPF, AGR, Drehmoment Monitoring and diesel service coverage.

Expanded support for EXEED, MG and OMODA

Chinese manufacturers continue to gain market share in many regions. This update reflects that trend with additional support across selected EXEED, MG und OMODA applications, especially around BOSCH MED17.8.10 and selected petrol-service workflows.

EXEED

Added selected readiness support on BOSCH MED17.8.10.

Additional petrol workflows including EVAP, Lambda/O2, Burbles and selected soft-rev coverage.

OMODA

New selected support for BOSCH MED17.8.10 in Burbles and Readiness workflows.

Coverage for new-market platforms must always be verified by exact ECU family, file type, software version and requested service.

Aktualisierte und überarbeitete Steuergerätesteuerungen

The largest part of the July update is made of reworked existing variants. These improvements are focused on better map handling, more complete switches, broader firmware compatibility and more predictable diagnostic behaviour.

Notable reworks

Burbles · HONDA · BOSCH MED17.9.3 — improved spark-timing related handling for cleaner calibration quality on selected supported files.
DPF · FORD · CONTINENTAL SID212EVO — additional handling for DPF temperature-sensor related switches on selected variants.
EGR · DACIA · BOSCH MD1CS016 — added duty-cycle map coverage to improve service accuracy.
Speed Limiter · HYUNDAI · KEFICO CPEGD3.20.1 — improved speed-source selection handling for better compatibility.
Start/Stop · VAG · BOSCH MED17.1.27 — added support for selected Start/Stop disable requests.
Torque Limiter · MERCEDES / VAG TCU — new module coverage around selected GETRAG VGS2-FDCT and TEMIC DQ200-MQB variants.

Exact support always depends on the ECU family, firmware version, file structure, vehicle application and requested service. For best results, verify the ECU before ordering.

Important hardware notes for workshops

Some ECU services require specific hardware preparation. Always follow the job-specific instruction shown for the exact ECU and requested service before writing the modified file.

AdBlue/SCR-Service

Selected MD1CE100 and MD1CC878 applications require the AdBlue ECU, and in some cases NOx sensors, to be disconnected.

DPF and GPF/OPF service

Some supported files require pressure and temperature sensor disconnection after the mechanical procedure.

EGR, AGS, EVAP and flap services

Selected actuator-based services require the actuator plug to be disconnected to avoid plausibility conflicts.

Lambda/O2-Service

Selected Lambda/O2 workflows require the relevant probe to be disconnected, while core engine-control diagnostics must remain intact.

Professional reminder: these notes are service-specific. Do not apply a generic instruction to a different ECU family or software version.

Überprüfung der ECU-Unterstützung

Suchen Sie Ihre ECU und Servicetyp auf ECU-Service-Abdeckung.
Bestätigen Sie die genaue ECU-Familie, die Fahrzeuganwendung und die Firmware-Variante, falls verfügbar.
Reichen Sie die korrekte Original-ECU-Datei über Datei tunen.
Include vehicle details, ECU identification, tool used and the requested service to reduce review time.

Aktualisierte Steuergerätesteuerungen durchsuchen →

Explore all professional services from the ECU-Dienste overview.

Compliance-Hinweis: Alle ECU-Dienste müssen in Übereinstimmung mit den in Ihrem Land geltenden Gesetzen und Vorschriften genutzt werden. Einige Dienste sind nur für den Offroad-, Motorsport-, Export-, Reparatur- oder gesetzlich zulässigen professionellen Gebrauch bestimmt.

FAQ – ECU Services Update July 2026

Was ist im ECU-Services-Update vom Juli 2026 enthalten?

Das ECU-Services-Update vom Juli 2026 enthält mehr als 840 neue und verbesserte Service-Einträge, mit über 50 neu hinzugefügten Lösungen und über 790 überarbeiteten oder erweiterten Varianten für professionelle ECU-Dateidienst-Workflows.

Welche Dienste erhielten die wichtigsten Ergänzungen?

Zu den wichtigen Ergänzungen zählen AdBlue/SCR, DPF, EGR, DTC, GPF/OPF, Lambda/O2, Readiness, Start/Stop, Drehmomentüberwachung, Drehmomentbegrenzer, AGS, EVAP sowie Workflows für Abgasklappen und Drallklappen bei ausgewählten unterstützten Steuergerätefamilien.

Welche Steuergeräte-Familien werden in diesem Update hervorgehoben?

Hervorgehobene Familien sind BOSCH MG1CS036, BOSCH MG1CS164, BOSCH MD1CE100, BOSCH MD1CC878, BOSCH MD1CS016, BOSCH MD1CS199, BOSCH MED17.8.10 sowie ausgewählte CONTINENTAL-, KEFICO-, DELPHI-, DENSO-, TRW- und TEMIC-Plattformen.

Bedeutet dies, dass jede aufgeführte ECU automatisch unterstützt wird?

Nein. Die Unterstützung hängt von der genauen ECU-Familie, dem Softwarestand, der Dateistruktur, der Fahrzeuganwendung, dem Hardwarezustand und dem gewünschten Service ab. Prüfen Sie die Unterstützung immer vor der Bestellung.

Wie prüfe ich, ob meine ECU-Datei unterstützt wird?

Rufen Sie zunächst die Seite „ECU-Serviceabdeckung“ auf. Laden Sie anschließend die Original-ECU-Datei über „Tune Your File“ hoch und geben Sie dabei die Fahrzeugdaten, die ECU-Informationen sowie den gewünschten Service an.

Sind emissionsbezogene Dienstleistungen für den Straßenverkehr legal?

Legality depends on the country and vehicle use. Emissions-related ECU services may be restricted or prohibited on public roads and must be used only for off-road, motorsport, export, repair or otherwise legally permitted professional applications.

TuningBot — ECU Services Update, July 2026. Professional ECU file services made simple.

ECU Services Update July 2026:840+ New & Improved Solutions