Horário: 07h–23h diariamente
PT
REMAPEIE AGORA!
Banner de Atualizações Técnicas e Suporte de ECU Tuningbot com Fundo Azul, Ícone de Nuvem de Atualização e Módulo de ECU Automotivo

Atualização dos Serviços ECU de Julho de 2026: 840+ Soluções Novas e Aprimoradas

Notícias e Atualizações / / 6 minutos de leitura

ECU services update · July 2026

ECU Services Update July 2026:
840+ New & Improved Solutions

The July 2026 TuningBot update expands Cobertura de serviço de ECU with a strong focus on practical workshop requests: Remoção de AdBlue/SCR, Remoção do DPF, Remoção do EGR, Remoção do DTC, GPF/OPF, Lambda/O2, Iniciar/Parar, Readiness e torque-related fluxos de trabalho.

This release introduces new supported ECU-service combinations and reworks hundreds of existing variants. The main direction is simple: broader compatibility, better diagnostic handling and more stable file processing for real-world professional ECU work.

840+
Novo e aprimorado

50+
New additions

790+
Reworked variants

Foco principal: wider ECU-service coverage and workshop-ready stability across modern diesel, petrol, truck and off-highway platforms.

This update is designed for daily workshop use: broader ECU compatibility, more complete service recognition, practical hardware notes and improved stability across supported vehicle applications.

ECU Services Update July 2026 at a glance

July 2026 coverage

July 2026 service-database expansion with new and improved ECU-service combinations.

Diesel and aftertreatment focus

AdBlue/SCR, DPF, EGR, DTC and torque-monitoring workflows on selected supported ECUs.

Petrol workflow focus

GPF/OPF, Lambda/O2, EVAP, exhaust flap, swirl flap, AGS and sound-related service coverage.

Truck and off-highway focus

Additional coverage for selected truck, agricultural, construction, industrial and utility applications.

The purpose is not only to add more entries, but also to improve reliability on existing supported solutions: cleaner switches, stronger compatibility and better file-specific processing consistency.

Major new ECU service additions

The July update adds important new coverage for selected modern ECU families across passenger cars, trucks, off-highway equipment and emerging vehicle brands. Below are the most relevant additions for professional file-service work.

FORD · BOSCH MG1CS036

New GPF/OPF/PPF support for selected files, with sensor-preparation notes where required.

VAG · BOSCH MG1CS164

New support across selected AGS, DTC, Lambda/O2, exhaust flap e flaps/swirl fluxos de trabalho.

VOLKSWAGEN TRUCKS · BOSCH MD1CE100

Added selected AdBlue/SCR, DTC e EGR service workflows for truck applications.

WEIDEMANN · BOSCH MD1CC878

Added selected AdBlue/SCR, DTC, EGR, Início Rápido e Readiness support.

HYUNDAI / KIA · KEFICO CPGPSH3.26.1

New Burbles Activation support for selected supported petrol applications.

NISSAN / VAUXHALL · BOSCH MD1CS016 / MD1CS199

Expanded selected DPF, EGR, Monitor de torque and diesel service coverage.

Expanded support for EXEED, MG and OMODA

Chinese manufacturers continue to gain market share in many regions. This update reflects that trend with additional support across selected EXEED, Minas Gerais e OMODA applications, especially around BOSCH MED17.8.10 and selected petrol-service workflows.

EXEED

Added selected readiness support on BOSCH MED17.8.10.

Minas Gerais

Additional petrol workflows including EVAP, Lambda/O2, Burbles and selected soft-rev coverage.

OMODA

New selected support for BOSCH MED17.8.10 in Burbles and Readiness workflows.

Coverage for new-market platforms must always be verified by exact ECU family, file type, software version and requested service.

Soluções de ECU atualizadas e retrabalhadas

The largest part of the July update is made of reworked existing variants. These improvements are focused on better map handling, more complete switches, broader firmware compatibility and more predictable diagnostic behaviour.

Notable reworks

  • Burbles · HONDA · BOSCH MED17.9.3 — improved spark-timing related handling for cleaner calibration quality on selected supported files.
  • DPF · FORD · CONTINENTAL SID212EVO — additional handling for DPF temperature-sensor related switches on selected variants.
  • EGR · DACIA · BOSCH MD1CS016 — added duty-cycle map coverage to improve service accuracy.
  • Speed Limiter · HYUNDAI · KEFICO CPEGD3.20.1 — improved speed-source selection handling for better compatibility.
  • Start/Stop · VAG · BOSCH MED17.1.27 — added support for selected Start/Stop disable requests.
  • Torque Limiter · MERCEDES / VAG TCU — new module coverage around selected GETRAG VGS2-FDCT and TEMIC DQ200-MQB variants.
Exact support always depends on the ECU family, firmware version, file structure, vehicle application and requested service. For best results, verify the ECU before ordering.

Important hardware notes for workshops

Some ECU services require specific hardware preparation. Always follow the job-specific instruction shown for the exact ECU and requested service before writing the modified file.

Serviço AdBlue/SCR

Selected MD1CE100 and MD1CC878 applications require the AdBlue ECU, and in some cases NOx sensors, to be disconnected.

DPF and GPF/OPF service

Some supported files require pressure and temperature sensor disconnection after the mechanical procedure.

EGR, AGS, EVAP and flap services

Selected actuator-based services require the actuator plug to be disconnected to avoid plausibility conflicts.

Serviço Lambda/O2

Selected Lambda/O2 workflows require the relevant probe to be disconnected, while core engine-control diagnostics must remain intact.

Professional reminder: these notes are service-specific. Do not apply a generic instruction to a different ECU family or software version.

Como verificar o suporte da ECU

  1. Pesquise sua ECU e tipo de serviço em Cobertura do serviço de ECU.
  2. Confirme a família exata da ECU, a aplicação no veículo e a variante de firmware, onde disponíveis.
  3. Envie o arquivo correto da ECU original através de Remapeie seu arquivo.
  4. Include vehicle details, ECU identification, tool used and the requested service to reduce review time.

Explore all professional services from the Serviços ECU overview.

Lembrete de conformidade: todos os serviços da ECU devem ser usados de acordo com as leis e regulamentos aplicáveis em seu país. Alguns serviços podem ser destinados apenas para uso off-road, em esportes a motor, exportação, reparo ou uso profissional legalmente permitido.

FAQ – ECU Services Update July 2026

O que está incluso na atualização de serviços da ECU de julho de 2026?

A atualização de serviços de ECU de julho de 2026 inclui mais de 840 novas e aprimoradas entradas de serviço, com mais de 50 novas soluções adicionadas e mais de 790 variantes retrabalhadas ou expandidas em fluxos de trabalho profissionais de serviços de arquivos de ECU.

Quais serviços receberam as adições mais importantes?

Entre as adições importantes estão AdBlue/SCR, DPF, EGR, DTC, GPF/OPF, Lambda/O₂, Readiness, Start/Stop, Monitoramento de Torque, Limitador de Torque, AGS, EVAP, abas de escape e abas de turbulência em famílias selecionadas de ECUs compatíveis.

Quais famílias de ECU são destacadas nesta atualização?

As famílias em destaque incluem BOSCH MG1CS036, BOSCH MG1CS164, BOSCH MD1CE100, BOSCH MD1CC878, BOSCH MD1CS016, BOSCH MD1CS199, BOSCH MED17.8.10 e plataformas SELECIONADAS CONTINENTAL, KEFICO, DELPHI, DENSO, TRW e TEMIC.

Isso significa que cada ECU listada é automaticamente suportada?

Não. O suporte depende da família de ECU exata, da versão de software, da estrutura do arquivo, da aplicação no veículo, do estado do hardware e do serviço pedido. Verifique sempre o suporte antes de encomendar.

Como verifico se o meu arquivo de ECU é suportado?

Acesse primeiro a página “Cobertura de serviços da ECU”. Em seguida, envie o arquivo da ECU original por meio da opção “Tune Your File”, informando os detalhes do veículo, as informações da ECU e o serviço solicitado.

Os serviços relacionados a emissões são permitidos para uso em vias públicas?

Legality depends on the country and vehicle use. Emissions-related ECU services may be restricted or prohibited on public roads and must be used only for off-road, motorsport, export, repair or otherwise legally permitted professional applications.

TuningBot — ECU Services Update, July 2026. Professional ECU file services made simple.


Posts Relacionados