Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.14

P0313 Misfire Detected with Low Fuel

Generische (OBD-II) Interpretation + 1 herstellerspezifische in der TuningBot DTC-Datenbank.

P · AntriebsstrangIgnitionFahrbarkeit: LimitedOBD2
Markenseiten:Ford

Generische (OBD-II) Interpretation

P0313
Misfire Detected with Low Fuel Generisch · ignition Datenzuverlässigkeit 90%

The control module detected crankshaft speed fluctuations consistent with combustion misfire (Misfire).

Symptome

  • Possible rough running and loss of power
  • MIL illuminated or flashing under load
  • Possible increased emissions

Mögliche Ursachen

  • Fuel system
  • mechanical fault

Empfohlene Prüfungen

  • Read misfire counters per cylinder
  • Check freeze frame conditions
  • Swap-test coil/plug between cylinders where applicable
  • Check injector operation and cylinder balance
  • Perform compression test if electrical checks pass

Herstellerspezifische Interpretationen

Ford

1 Interpretation
P0313:00
misfire detected with low fuel level Ford · ignition Datenzuverlässigkeit 94%

Ford documents P0313:00 (no sub type information) for its 2024-2025 gasoline-engine OBD monitor strategy as misfire detected with low fuel level. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years

Verwandte und benachbarte Codes

So liest man P0313

P

Antriebsstrang: Motor, Getriebe und Antrieb.

0

Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.

313

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P0313

Was bedeutet P0313?

Misfire Detected with Low Fuel. The control module detected crankshaft speed fluctuations consistent with combustion misfire (Misfire).

Ist P0313 generisch oder herstellerspezifisch?

P0313 existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 1 herstellerspezifischen Interpretationen: Ford. Immer im Kontext Ihres Fahrzeugs lesen.

Kann TuningBot P0313 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag und korrigiert, wenn das Steuergerät es verlangt, auch die Checksum. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für Ford-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen