P1830 Диагностический код неисправности (7 интерпретаций)

The control module detected an open circuit or short circuit condition in the Open Or Shorted Condition circuit. This is the manufacturer-specific definition used by Chrysler.

The control module detected an open circuit or short circuit condition in the Open Or Shorted Condition circuit. This is the manufacturer-specific definition used by Dodge.

The control module detected a short circuit to battery voltage in the Transmission Transfer Case Counter Clockwise Shift Relay Coil circuit. This is the manufacturer-specific definition used by Ford.

The control module detected that the Clutch Torque Tolerance value was below the expected limit. This is the manufacturer-specific definition used by Hyundai.

The stored code identifies a fault of the Front wheels speed not received by the CAN information fault (Anti-lock brake control unit). Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

The control module detected that the expected Vehicle speed coherence fault was absent. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected a short circuit to battery voltage in the Pressure Control Valve 4 (N218) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 18238. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).