Open Or Shorted Condition Detected In The Clutch Pedal Switch Override Relay Control
Chrysler · transmission
Data confidence62%
The control module detected an open circuit or short circuit condition in the Open Or Shorted Condition circuit. This is the manufacturer-specific definition used by Chrysler.
Recommended checks
Perform a full module scan
Review freeze-frame and occurrence data
Confirm the exact vehicle, ECU and software context
Open Or Shorted Condition Detected In The Clutch Pedal Switch Override Relay Control
Dodge · transmission
Data confidence62%
The control module detected an open circuit or short circuit condition in the Open Or Shorted Condition circuit. This is the manufacturer-specific definition used by Dodge.
Recommended checks
Perform a full module scan
Review freeze-frame and occurrence data
Confirm the exact vehicle, ECU and software context
Transmission Transfer Case Counter Clockwise Shift Relay Coil Short Circuit To Battery
Ford · engine
Data confidence80%
The control module detected a short circuit to battery voltage in the Transmission Transfer Case Counter Clockwise Shift Relay Coil circuit. This is the manufacturer-specific definition used by Ford.
Clutch Torque Tolerance Lower Limit
Hyundai · transmission
Data confidence62%
The control module detected that the Clutch Torque Tolerance value was below the expected limit. This is the manufacturer-specific definition used by Hyundai.
Front wheels speed not received by the CAN information fault (Anti-lock brake control unit)
PSA · engine
Data confidence72%
The stored code identifies a fault of the Front wheels speed not received by the CAN information fault (Anti-lock brake control unit). Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
Applies toPeugeotAM6/AT6 automatic gearbox ECU
P1830
Vehicle speed coherence fault : No signal
PSA · engine
Data confidence72%
The control module detected that the expected Vehicle speed coherence fault was absent. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Pressure Control Valve 4 (N218): Short to Plus
VAG · engine
Data confidence80%
The control module detected a short circuit to battery voltage in the Pressure Control Valve 4 (N218) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 18238. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Possible causes
Wiring from/to Pressure Control Valve 4 (N218) Short to Plus
Pressure Control Valve 4 (N218) faulty
Recommended checks
Check Wiring from/to Pressure Control Valve 4 (N218)
Powertrain: engine, transmission and driveline systems.
1
Manufacturer-defined range: the meaning can differ between brands.
830
Specific fault index within the subsystem.
Frequently asked questions about P1830
What does P1830 mean?
Diagnostic Trouble Code (7 interpretations). The control module detected an open circuit or short circuit condition in the Open Or Shorted Condition circuit. This is the manufacturer-specific definition used by Chrysler.
Is P1830 generic or manufacturer-specific?
P1830 is a manufacturer-specific code. In this database it is documented for: Chrysler, Dodge, Ford, Hyundai, PSA, VAG. The same number can mean something different on other brands.
Can TuningBot remove P1830 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Chrysler
Dodge
Ford
Hyundai
PSA
VAG