P1800 Диагностический код неисправности (6 интерпретаций)

The control module detected improper operation of the Engine torque. This is the manufacturer-specific definition used by Kia.

The control module detected improper operation of the Intake manifold air control solenoid. This is the manufacturer-specific definition used by Nissan.

The control module detected a fault associated with the System voltage, ignition - out of limits circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Opel.

The stored code identifies a fault of the Position N programming fault. Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

The stored code identifies a fault of the Programming not carried out or incomplete fault. Documented for the Automated manual gearbox electric control ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

The stored code identifies a fault of the Gearbox programming incomplete or not carried out fault. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.