Horário: 07h–23h diariamente

Base de dados DTC TuningBot · v4.37.14

02818 Electronic Steering Column Lock Enabling for Electronic Ignition Lock

1 interpretação específica do fabricante em 1 fabricante na base de dados DTC TuningBot.

SteeringOEM
Páginas por marca:VAG

VAG

1 interpretação
02818
Electronic Steering Column Lock Enabling for Electronic Ignition Lock VAG · steering Fiabilidade do dado 80%

The control module detected a fault associated with the Electronic Steering Column Lock Enabling for Electronic Ignition Lock circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Open or Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Sintomas

  • Electronic Steering Column Lock not working
  • Engine not starting

Causas possíveis

Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty

Verificações recomendadas

Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)

Aplica-se a Volkswagen

Códigos relacionados e próximos

Perguntas frequentes sobre 02818

O que significa 02818?

Electronic Steering Column Lock Enabling for Electronic Ignition Lock. The control module detected a fault associated with the Electronic Steering Column Lock Enabling for Electronic Ignition Lock circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Open or Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

02818 é genérico ou específico do fabricante?

02818 é um código específico do fabricante. Nesta base de dados está documentado para: VAG. O mesmo número pode significar outra coisa noutras marcas.

A TuningBot consegue remover 02818 ao nível do ficheiro?

Não garantido. 02818 é um código específico do fabricante num formato OEM, por isso a remoção depende da centralina e de como a avaria está implementada - alguns são tratáveis, outros não. Peça um orçamento e os nossos engenheiros verificam o ficheiro e dizem-lhe gratuitamente se 02818 é removível no seu caso.

Outros serviços de ficheiro

RemapeamentoResultados Stage 1 no dinamômetro para motores VAG Ver os resultados →

← Pesquisar em toda a base de dados DTC