Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.14

U034E Software Incompatibility With Active Grille Air Shutter Module A

Interpretación genérica (OBD-II) en la base de datos DTC de TuningBot.

U · RedNetworkOBD2

Qué significa U034E

U034E
Software Incompatibility With Active Grille Air Shutter Module A Genérico · network Fiabilidad del dato 65%

The control module detected a fault associated with the Software Incompatibility With Active Grille Air Shutter Module A circuit or function; the stored code identifies the affected component rather than a single failure mode.

Síntomas

  • Multiple warning lamps possible
  • Functions of the affected module unavailable

Posibles causas

  • CAN bus wiring fault (open, short, chafed harness)
  • Faulty control module loading the bus
  • Connector or terminal corrosion
  • Power supply or ground fault of a module

Comprobaciones recomendadas

  • Perform a full-module scan to map which modules communicate
  • Check CAN bus resistance and voltages at the diagnostic connector
  • Inspect wiring and connectors of the affected module
  • Check module power supply and grounds
  • Disconnect suspect modules one at a time only with a documented procedure

Códigos relacionados y cercanos

Cómo se lee U034E

U

Red: comunicación entre centralitas.

0

Código genérico estándar SAE: mismo significado en cualquier marca.

34E

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre U034E

¿Qué significa U034E?

Software Incompatibility With Active Grille Air Shutter Module A. The control module detected a fault associated with the Software Incompatibility With Active Grille Air Shutter Module A circuit or function; the stored code identifies the affected component rather than a single failure mode.

¿U034E es genérico o específico del fabricante?

U034E es un código genérico OBD-II: tiene el mismo significado en cualquier marca y modelo que sigue el estándar SAE.

¿Puede TuningBot eliminar U034E a nivel de archivo?

No garantizado. Los códigos powertrain (P) se pueden desactivar de forma fiable en la calibración de la ECU, pero los de carrocería, chasis y red dependen de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si U034E se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC