Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P3193 VAG - Intake Manifold Runner Control: Open Stop outside of Valid Range

Interpretación específica del fabricante para VAG. Todas las interpretaciones de P3193

P · Motor y transmisiónEngineOBD2

Qué significa P3193

P3193
Intake Manifold Runner Control: Open Stop outside of Valid Range VAG · engine Fiabilidad del dato 80%

The control module detected a fault associated with the Intake Manifold Runner Control: Open Stop outside of Valid Range circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 19649. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Posibles causas

  • Intake Manifold Tuning Valve Position Sensor (G336) faulty
  • Motor for Intake Manifold Flap (V157) faulty

Comprobaciones recomendadas

  • Check Intake Manifold Tuning Valve Position Sensor (G336)
  • Check Motor for Intake Manifold Flap (V157)
Se aplica a Volkswagen

Códigos relacionados y cercanos

Cómo se lee P3193

P

Motor y transmisión: motor, cambio y transmisión.

3

Rango definido por el fabricante: el significado puede variar entre marcas.

193

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P3193

¿Qué significa P3193?

Intake Manifold Runner Control: Open Stop outside of Valid Range. The control module detected a fault associated with the Intake Manifold Runner Control: Open Stop outside of Valid Range circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 19649. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

¿P3193 es genérico o específico del fabricante?

P3193 es un código específico del fabricante. En esta base de datos está documentado para: VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P3193 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores VAG Ver los resultados →

← Buscar en toda la base de datos DTC