The control module detected that the Flowmeter signal was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Base de datos DTC de TuningBot · v4.37.15
P3007 PSA - Código de avería diagnóstico (4 interpretaciones)
Interpretación específica del fabricante para PSA. Todas las interpretaciones de P3007
Qué significa P3007
The control module detected the fault condition "Air flow lower than recommended" for the Air circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The cited PSA workshop reference documents P3007 as "Air circuit: Air flow lower than recommended (discrepancy or air entering before the turbocharger)" for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected that the Flowmeter signal was below its expected limit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Códigos relacionados y cercanos
Cómo se lee P3007
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Preguntas frecuentes sobre P3007
¿Qué significa P3007?
Código de avería diagnóstico (4 interpretaciones). The control module detected that the Flowmeter signal was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
¿P3007 es genérico o específico del fabricante?
P3007 es un código específico del fabricante. En esta base de datos está documentado para: PSA. El mismo número puede significar otra cosa en otras marcas.
¿Puede TuningBot eliminar P3007 a nivel de archivo?
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Otros servicios de archivo
Entender el sistema detrás de este código: Estrategia de diagnóstico y lógica DTC
