Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P0036 Código de avería diagnóstico (2 variantes)

Interpretación genérica (OBD-II) + 1 específicas del fabricante en la base de datos DTC de TuningBot.

P · Motor y transmisiónEmissionsOBD2
Páginas por marca:Ford

Interpretación genérica (OBD-II)

P0036
HO2S Heater Control Circuit Bank 1 Sensor 2 Genérico · emissions Fiabilidad del dato 90%

The control module detected a fault associated with the HO2S Heater Control Circuit Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.

Síntomas

  • MIL illuminated
  • Possible increased fuel consumption
  • Possible unstable idle

Posibles causas

  • Wiring
  • HO2S
  • ECM

Comprobaciones recomendadas

  • Read live sensor voltage/current and heater status
  • Inspect wiring and connectors
  • Check for exhaust leaks near the sensor
  • Check fuel trim values for upstream mixture faults

Interpretaciones específicas del fabricante

Ford

2 interpretaciones
P0036:1E
HO2S Heater Resistance, Bank 1 Ford · emissions Fiabilidad del dato 94%

Ford documents P0036:1E for its 2024-2025 gasoline-engine OBD monitor strategy as ho2s heater resistance, bank 1. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Comprobaciones recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Se aplica a Ford gasoline-engine OBD applications|2024-2025 model years
P0036:92
HO2S12 Heater Control Circuit, Bank 1 Ford · emissions Fiabilidad del dato 94%

Ford documents P0036:92 for its 2024-2025 gasoline-engine OBD monitor strategy as ho2s12 heater control circuit, bank 1. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Comprobaciones recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Check applicable OEM service information
Se aplica a Ford gasoline-engine OBD applications|2024-2025 model years

Códigos relacionados y cercanos

Cómo se lee P0036

P

Motor y transmisión: motor, cambio y transmisión.

0

Código genérico estándar SAE: mismo significado en cualquier marca.

036

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P0036

¿Qué significa P0036?

Código de avería diagnóstico (2 variantes). The control module detected a fault associated with the HO2S Heater Control Circuit Bank 1 Sensor 2 circuit or function; the stored code identifies the affected component rather than a single failure mode.

¿P0036 es genérico o específico del fabricante?

P0036 existe tanto como código genérico OBD-II (mismo significado en cualquier marca) como con 1 interpretaciones específicas del fabricante: Ford. Léelo siempre en el contexto de tu vehículo.

¿Puede TuningBot eliminar P0036 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores Ford Ver los resultados →

← Buscar en toda la base de datos DTC