ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Mini 2.0D Remap & Chiptuning – Cooper SD F56, Cooper SD Clubman, Countryman SD
Professional ECU tuning and remapping for the Mini 2.0D diesel engine. Our dyno-tested Stage 1 calibrations improve torque delivery, throttle response and drivability, with optional DPF, EGR and AdBlue/SCR solutions for supported ECUs.
Engine codes: B47C20
Performance Gains (Dyno-Tested)
| Engine | Stock | Tuned | HP Gain | Torque Gain | ECU | Order |
|---|---|---|---|---|---|---|
| 2.0D | 143 hp | 171 hp | +28 hp +20% | +58 Nm | EDC17C41Stage 1 | Order file → |
| 2.0D | 112 hp | 168 hp | +56 hp +50% | +112 Nm | EDC17C50Stage 1 | Order file → |
| 2.0D | 143/150 hp | 170/177 hp | +27 hp +18 to +19% | +50 Nm | EDC17C50Stage 1 | Order file → |
| 2.0D | 170 hp | 218 hp | +48 hp +28% | +71 Nm | EDC17C50Stage 1 | Order file → |
| 2.0D | 184 hp | 216 hp | +32 hp +17% | +58 Nm | EDC17C50Stage 1 | Order file → |
| 2.0D | 190 hp | 218 hp | +28 hp +15% | +61 Nm | MD1CS001Stage 1 | Order file → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Cars this engine is fitted to
Cooper SD F56, Countryman SD, BMW 116d, Mini (f54) Clubman, Cooper SD Clubman, BMW 118d and 22 more across BMW and Mini
BMW · 23Mini · 5Measured here, tunable everywhere
The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.
Available ECU Services for this Engine
The following solutions are supported on the ECU(s) of this vehicle (Diesel):
Technical Notes per ECU
Disconnection and read requirements differ by ECU. The notes below apply to the specific ECU listed; the exact removal scope per service is confirmed on each service page.
Each note is tagged with the service it refers to and applies to the ECU it is listed under. Mechanical preparation is the installer's responsibility. Emission-related solutions are for off-road or motorsport use where permitted by law.
Supported ECU(s): EDC17C41, EDC17C50, MD1CS001
Frequently Asked Questions
How much power can a Mini 2.0D gain with Stage 1 tuning?
Stage 1 ECU tuning for the Mini 2.0D can add up to +56 hp and +112 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.
Can DPF, EGR and AdBlue/SCR be removed on the Mini 2.0D?
DPF, EGR and AdBlue/SCR off is supported on the ECU(s) of this vehicle, strictly for off-road or motorsport use where permitted by law. The exact mechanical preparation and sensor handling are listed per ECU in the technical notes below.
How do I order and how fast is the tuning file delivered?
Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).
Is the Mini 2.0D tuning file plug-and-play?
You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.
Order your Mini 2.0D tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23