Intake Valves For Cylinder Shut Off Open Circuit
VAG · engine
Data confidence62%
The control module detected an interruption (open circuit) in the Intake Valves For Cylinder Shut Off circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
Possible causes
Wiring open circuit
valve controller
Recommended checks
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Applies toAudi
P1211
Intake Valves For Cylinder Shut Off Open Circuit
VAG · engine
Data confidence80%
The control module detected an interruption (open circuit) in the Intake Valves For Cylinder Shut Off circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Volkswagen.
Powertrain: engine, transmission and driveline systems.
1
Manufacturer-defined range: the meaning can differ between brands.
211
Specific fault index within the subsystem.
Frequently asked questions about P1211
What does P1211 mean?
Intake Valves For Cylinder Shut Off Open Circuit. The control module detected an interruption (open circuit) in the Intake Valves For Cylinder Shut Off circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
Is P1211 generic or manufacturer-specific?
P1211 is a manufacturer-specific code. In this database it is documented for: VAG. The same number can mean something different on other brands.
Can TuningBot remove P1211 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU