Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P245E Diagnose-Fehlercode (5 Varianten)

Generische (OBD-II) Interpretation + 1 herstellerspezifische in der TuningBot DTC-Datenbank.

P · AntriebsstrangEmissionsOBD2
Markenseiten:Ford

Generische (OBD-II) Interpretation

P245E
Particulate Filter Pressure Sensor B Circuit Generisch · emissions Datenzuverlässigkeit 78%

The control module detected improper operation of the Particulate Filter Pressure Sensor B circuit.

Symptome

  • MIL or DPF warning illuminated
  • Possible reduced power or limp mode
  • Possible frequent regeneration attempts

Mögliche Ursachen

  • Wiring
  • DPF pressure sensor
  • ECM

Empfohlene Prüfungen

  • Read soot load, ash load and differential pressure values
  • Check differential pressure sensor and hoses
  • Verify exhaust gas temperature sensor readings
  • Check for related injection, EGR or boost codes
  • Verify regeneration conditions can be met (trip profile)

Herstellerspezifische Interpretationen

Ford

5 Interpretationen
P245E:01
Particulate Filter Pressure Sensor "B" Circuit Ford · emissions Datenzuverlässigkeit 94%

Ford documents P245E:01 for its 2024-2025 gasoline-engine OBD monitor strategy as particulate filter pressure sensor "b" circuit. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years
P245E:16
Particulate Filter Pressure Sensor “B” Circuit Low Ford · emissions Datenzuverlässigkeit 94%

Ford documents P245E:16 (circuit voltage below threshold) for its 2024-2025 gasoline-engine OBD monitor strategy as particulate filter pressure sensor “b” circuit low. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years
P245E:17
Particulate Filter Pressure Sensor “B” Circuit High Ford · emissions Datenzuverlässigkeit 94%

Ford documents P245E:17 (circuit voltage above threshold) for its 2024-2025 gasoline-engine OBD monitor strategy as particulate filter pressure sensor “b” circuit high. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years
P245E:1F
Particulate Filter Pressure Sensor “B” Circuit Intermittent/Erratic Ford · emissions Datenzuverlässigkeit 94%

Ford documents P245E:1F for its 2024-2025 gasoline-engine OBD monitor strategy as particulate filter pressure sensor “b” circuit intermittent/erratic. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years
P245E:92
Particulate Filter Pressure Sensor "B" Circuit Range/Performance Ford · emissions Datenzuverlässigkeit 94%

Ford documents P245E:92 for its 2024-2025 gasoline-engine OBD monitor strategy as particulate filter pressure sensor "b" circuit range/performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für Ford gasoline-engine OBD applications|2024-2025 model years

Verwandte und benachbarte Codes

So liest man P245E

P

Antriebsstrang: Motor, Getriebe und Antrieb.

2

Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.

45E

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P245E

Was bedeutet P245E?

Diagnose-Fehlercode (5 Varianten). The control module detected improper operation of the Particulate Filter Pressure Sensor B circuit.

Ist P245E generisch oder herstellerspezifisch?

P245E existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 1 herstellerspezifischen Interpretationen: Ford. Immer im Kontext Ihres Fahrzeugs lesen.

Kann TuningBot P245E auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für Ford-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen