Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1830 PSA - Diagnose-Fehlercode (2 Interpretationen)

Herstellerspezifische Interpretation für PSA. Alle Interpretationen von P1830

P · AntriebsstrangEngineOBD2

Was P1830 bedeutet

P1830
Front wheels speed not received by the CAN information fault (Anti-lock brake control unit) PSA · engine Datenzuverlässigkeit 72%

The stored code identifies a fault of the Front wheels speed not received by the CAN information fault (Anti-lock brake control unit). Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

Gilt für Peugeot AM6/AT6 automatic gearbox ECU
P1830
Vehicle speed coherence fault : No signal PSA · engine Datenzuverlässigkeit 72%

The control module detected that the expected Vehicle speed coherence fault was absent. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot MCP 6-speed piloted manual gearbox ECU

Verwandte und benachbarte Codes

So liest man P1830

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

830

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1830

Was bedeutet P1830?

Diagnose-Fehlercode (2 Interpretationen). The stored code identifies a fault of the Front wheels speed not received by the CAN information fault (Anti-lock brake control unit). Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

Ist P1830 generisch oder herstellerspezifisch?

P1830 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: PSA. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1830 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für PSA-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen