Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.38.5

P0191 Fuel Rail Pressure Sensor Circuit Range/Performance

Generische (OBD-II) Interpretation + 1 herstellerspezifische in der TuningBot DTC-Datenbank.

P · AntriebsstrangFuelOBD2
Markenseiten:Genesis

Generische (OBD-II) Interpretation

P0191
Fuel Rail Pressure Sensor Circuit Range/Performance Generisch · fuel Datenzuverlässigkeit 90%

The control module judged the Fuel Rail Pressure signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions.

Symptome

  • Possible hard starting or long cranking
  • Possible reduced power or cutting out
  • MIL illuminated

Mögliche Ursachen

  • Wiring
  • FRP sensor

Empfohlene Prüfungen

  • Read specified vs actual rail pressure at cranking, idle and load
  • Check low-pressure supply (pressure/volume) first
  • Check control valve/regulator operation
  • Measure injector return flow where applicable
  • Inspect wiring and connectors of pressure components

Herstellerspezifische Interpretationen

Genesis

1 Interpretation
P0191:00
Fuel rail pressure sensor circuit range/performance Genesis · fuel Datenzuverlässigkeit 99%

The cited OEM bulletin documents P0191:00 for Genesis in the stated vehicle and controller context. It identifies fuel rail pressure sensor circuit range/performance; the bulletin-specific condition must not be generalized to other platforms or modules.

Symptome

Check-engine light illuminated

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Gilt für 2022-2023 Genesis G70 (IK)|2.0L T-GDI|specified production-date range Engine Control Module (ECM)

Verwandte und benachbarte Codes

So liest man P0191

P

Antriebsstrang: Motor, Getriebe und Antrieb.

0

Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.

191

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P0191

Was bedeutet P0191?

Fuel Rail Pressure Sensor Circuit Range/Performance. The control module judged the Fuel Rail Pressure signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions.

Ist P0191 generisch oder herstellerspezifisch?

P0191 existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 1 herstellerspezifischen Interpretationen: Genesis. Immer im Kontext Ihres Fahrzeugs lesen.

Kann TuningBot P0191 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen