Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

C1006 Land Rover - Diagnose-Fehlercode (5 Varianten)

Herstellerspezifische Interpretation für Land Rover. Alle Interpretationen von C1006

C · FahrwerkBodyUDS

Was C1006 bedeutet

C1006:11
LH Power Running Board motor line short to ground — Circuit Short to Ground Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected lh power running board motor line short to ground with failure type 11, circuit short to ground. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU
C1006:12
LH Power Running Board motor line short to battery — Circuit Short to Battery Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected lh power running board motor line short to battery with failure type 12, circuit short to battery. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU
C1006:13
LH Power Running Board motor line open — Circuit Open Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected lh power running board motor line open with failure type 13, circuit open. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU
C1006:19
LH Power running board motor short — Circuit Current Above Threshold Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected lh power running board motor short with failure type 19, circuit current above threshold. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU
C1006:67
LH Power running board motor current sensing — Signal Incorrect After Event Land Rover · body Datenzuverlässigkeit 95%

The L405 Deployable Side Step ECU detected lh power running board motor current sensing with failure type 67, signal incorrect after event. This interpretation is limited to the documented DSS controller.

Empfohlene Prüfungen

  • Perform a full module scan
  • Verify battery voltage
  • Inspect DSS wiring and connectors
  • Inspect the running-board mechanism for binding
  • Check the Hall-effect sensor signal when applicable
  • Follow the Land Rover DSS troubleshooting guide
Gilt für Range Rover L405 2013 model year Deployable Side Step (DSS) ECU

Verwandte und benachbarte Codes

So liest man C1006

C

Fahrwerk: Bremsen, Lenkung und Federung.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

006

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu C1006

Was bedeutet C1006?

Diagnose-Fehlercode (5 Varianten). The L405 Deployable Side Step ECU detected lh power running board motor line short to ground with failure type 11, circuit short to ground. This interpretation is limited to the documented DSS controller.

Ist C1006 generisch oder herstellerspezifisch?

C1006 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Land Rover. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot C1006 auf Dateiebene entfernen?

Nicht garantiert. Powertrain-Codes (P) lassen sich zuverlässig in der Kalibrierung deaktivieren, Body-, Fahrwerk- und Netzwerkcodes hängen dagegen vom konkreten Steuergerät und von der Umsetzung des Fehlers ab - manche gehen, manche nicht. Fordern Sie ein Angebot an, und unsere Ingenieure prüfen Ihre Datei und sagen Ihnen kostenlos, ob C1006 in Ihrem Fall entfernbar ist.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für Land Rover-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen