Часы работы: 07–23 ежедневно

База данных DTC TuningBot · v4.37.15

P26C5 Диагностический код неисправности (3 вариантов)

Общая (OBD-II) интерпретация + 1 специфичных для производителя в базе DTC TuningBot.

P · Силовой агрегатEngineOBD2
Страницы по маркам:Ford

Общая (OBD-II) интерпретация

P26C5
Exhaust Flow Control Valve A Control Circuit/Open Общий · engine Достоверность данных 65%

The control module detected an interruption (open circuit) in the Exhaust Flow Control Valve A Control circuit, so the expected electrical continuity was not present.

Интерпретации производителей

Ford

3 интерпретаций
P26C5:11
Exhaust Flow Control Valve “A” Control Circuit Low Ford · engine Достоверность данных 94%

Ford documents P26C5:11 (circuit short to ground) for its 2024-2025 gasoline-engine OBD monitor strategy as exhaust flow control valve “a” control circuit low. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P26C5:12
Exhaust Flow Control Valve “A” Control Circuit High Ford · engine Достоверность данных 94%

Ford documents P26C5:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as exhaust flow control valve “a” control circuit high. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P26C5:13
Exhaust Flow Control Valve “A” Control Circuit/Open Ford · engine Достоверность данных 94%

Ford documents P26C5:13 (circuit open) for its 2024-2025 gasoline-engine OBD monitor strategy as exhaust flow control valve “a” control circuit/open. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years

Связанные и соседние коды

Как читать P26C5

P

Силовой агрегат: двигатель, коробка и трансмиссия.

2

Общий код стандарта SAE: одинаковое значение у всех марок.

6C5

Конкретный индекс неисправности внутри подсистемы.

Частые вопросы о P26C5

Что означает P26C5?

Диагностический код неисправности (3 вариантов). The control module detected an interruption (open circuit) in the Exhaust Flow Control Valve A Control circuit, so the expected electrical continuity was not present.

P26C5 — общий код или специфичный для производителя?

P26C5 существует и как общий код OBD-II (одинаковое значение у всех марок), и с 1 интерпретациями производителей: Ford. Всегда читайте его в контексте вашего автомобиля.

Может ли TuningBot удалить P26C5 на уровне файла?

Если логика неисправности заложена в калибровке ЭБУ — да: наша услуга DTC Removal отключает конкретную запись ошибки. Коррекция checksum не входит в услугу: это отдельная опциональная услуга. Не уверены, подходит ли ваш случай? Запросите бесплатную оценку, и наши инженеры проверят ваш файл.

Другие услуги по файлу

Чип-тюнингРезультаты Stage 1 на стенде для двигателей Ford Смотреть результаты →

← Искать по всей базе DTC