P1828 Диагностический код неисправности (7 интерпретаций)

The control module detected improper operation of the Transmission Transfer Case Counter Clockwise Shift Relay Coil circuit. This is the manufacturer-specific definition used by Ford.

The control module detected a short circuit to ground in the Pressure Sensor for 4WD Signal Wire circuit. This is the manufacturer-specific definition used by Hyundai.

The control module detected a fault associated with the Shift Fork Position Sensor 2 System Neutral circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mitsubishi.

The control module detected a fault associated with the Pressure regulator 4 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.

The control module detected a short circuit to battery voltage in the Fault on the starting inhibiting control output (Start-lock) circuit. Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected a short circuit to battery voltage in the Authorization information to start circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected a fault associated with the Pressure Control Solenoid 4 Electrical circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen.