400 W DC/AC Inverter System Inoperative
Ford · body
LowFiabilidade do dado97%
The BCM stored B1330:9A while the specified 400 W DC/AC inverter system was inoperative. Ford attributes the documented application to a possible connection issue at connector C4628.
Sintomas
400 W DC/AC inverter system inoperative
Causas possíveis
Connection issue at connector C4628
Verificações recomendadas
Perform a full BCM scan
Inspect connector C4628 for corrosion, dirt, or damage
Inspect the pickup-bed outlet harness and retainer
Verify the vehicle matches TSB 24-2020 applicability
Aplica-se aFord F-150 2021-2023|400 W DC/AC inverter with pickup-bed outletBody Control Module (BCM)
B1330:9A
BCM Self-Test History DTC B1330 — Component or System Operating Conditions
Ford · body
LowFiabilidade do dado76%
Ford SSM 51578 documents B1330:9A as a BCM self-test history DTC on the 2023 F-Super Duty. When all bulletin criteria are met, it reflects the self-test sequence rather than a confirmed module failure.
Causas possíveis
Incorrect internal measurement sequence during diagnostic self-test
Verificações recomendadas
Perform a full BCM scan
Confirm that no other BCM DTC is present
Confirm that the MIL is off with the engine running
Confirm that no driveability concern is present
Apply Ford SSM 51578 criteria
Aplica-se aFord F-Super Duty P708 2023Body Control Module (BCM)
Carroçaria: airbags, conforto e sistemas do habitáculo.
1
Intervalo definido pelo fabricante: o significado pode variar entre marcas.
330
Índice específico da avaria dentro do subsistema.
Perguntas frequentes sobre B1330
O que significa B1330?
Código de avaria de diagnóstico (2 interpretações). The BCM stored B1330:9A while the specified 400 W DC/AC inverter system was inoperative. Ford attributes the documented application to a possible connection issue at connector C4628.
B1330 é genérico ou específico do fabricante?
B1330 é um código específico do fabricante. Nesta base de dados está documentado para: Ford. O mesmo número pode significar outra coisa noutras marcas.
A TuningBot consegue remover B1330 ao nível do ficheiro?
Não garantido. Os códigos powertrain (P) desativam-se de forma fiável na calibração da ECU, mas os de carroçaria, chassis e rede dependem da centralina e de como a avaria está implementada - alguns são tratáveis, outros não. Peça um orçamento e os nossos engenheiros verificam o ficheiro e dizem-lhe gratuitamente se B1330 é removível no seu caso.