Часы работы: 07–23 ежедневно

База данных DTC TuningBot · v4.37.15

P0960 Диагностический код неисправности (3 вариантов)

Общая (OBD-II) интерпретация + 1 специфичных для производителя в базе DTC TuningBot.

P · Силовой агрегатTransmissionOBD2
Страницы по маркам:Ford

Общая (OBD-II) интерпретация

P0960
Pressure Control Solenoid A Control Circuit / Open Общий · transmission Достоверность данных 90%

The control module detected an interruption (open circuit) in the Pressure Control Solenoid A Control circuit, so the expected electrical continuity was not present.

Возможные причины

  • Wiring
  • poor connection
  • pressure control solenoid
  • ECM/PCM/TCM

Интерпретации производителей

Ford

3 интерпретаций
P0960:11
short to ground Ford · transmission Достоверность данных 94%

Ford documents P0960:11 (circuit short to ground) for its 2024-2025 gasoline-engine OBD monitor strategy as short to ground. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0960:12
short to power Ford · transmission Достоверность данных 94%

Ford documents P0960:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as short to power. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0960:13
open circuit Ford · transmission Достоверность данных 94%

Ford documents P0960:13 (circuit open) for its 2024-2025 gasoline-engine OBD monitor strategy as open circuit. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years

Связанные и соседние коды

Как читать P0960

P

Силовой агрегат: двигатель, коробка и трансмиссия.

0

Общий код стандарта SAE: одинаковое значение у всех марок.

960

Конкретный индекс неисправности внутри подсистемы.

Частые вопросы о P0960

Что означает P0960?

Диагностический код неисправности (3 вариантов). The control module detected an interruption (open circuit) in the Pressure Control Solenoid A Control circuit, so the expected electrical continuity was not present.

P0960 — общий код или специфичный для производителя?

P0960 существует и как общий код OBD-II (одинаковое значение у всех марок), и с 1 интерпретациями производителей: Ford. Всегда читайте его в контексте вашего автомобиля.

Может ли TuningBot удалить P0960 на уровне файла?

Если логика неисправности заложена в калибровке ЭБУ — да: наша услуга DTC Removal отключает конкретную запись ошибки. Коррекция checksum не входит в услугу: это отдельная опциональная услуга. Не уверены, подходит ли ваш случай? Запросите бесплатную оценку, и наши инженеры проверят ваш файл.

Другие услуги по файлу

Чип-тюнингРезультаты Stage 1 на стенде для двигателей Ford Смотреть результаты →

← Искать по всей базе DTC