Часы работы: 07–23 ежедневно

База данных DTC TuningBot · v4.37.15

P060A Диагностический код неисправности (6 вариантов)

Общая (OBD-II) интерпретация + 1 специфичных для производителя в базе DTC TuningBot.

P · Силовой агрегатSoftwareOBD2
Страницы по маркам:Ford

Общая (OBD-II) интерпретация

P060A
Internal Control Module Monitoring Processor Performance Общий · software Достоверность данных 85%

The control module judged the Internal Control Module Monitoring Processor behaviour implausible for the current operating conditions.

Симптомы

  • MIL illuminated
  • Symptoms depend on the affected internal function

Возможные причины

  • Internal control module hardware fault
  • Control module supply voltage or ground fault
  • Software/coding fault after programming
  • In rare cases, interference from wiring faults

Рекомендуемые проверки

  • Check control module power supplies and grounds first
  • Check battery condition and charging voltage
  • Verify software version and check OEM bulletins
  • Clear the code and retest under the original conditions
  • Only after supply-side checks, consider module assessment

Интерпретации производителей

Ford

6 интерпретаций
P060A:38
Internal Control Module Monitoring Processor Timer Alarm Ford · software Достоверность данных 94%

Ford documents P060A:38 for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module monitoring processor timer alarm. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P060A:42
Internal Control Module Monitoring Processor Fault Ford · software Достоверность данных 94%

Ford documents P060A:42 for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module monitoring processor fault. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P060A:49
Internal Control Module Main vs Monitoring Processor Ford · software Достоверность данных 94%

Ford documents P060A:49 (internal electronic failure) for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module main vs monitoring processor. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P060A:75
Internal Control Module A/D Processing Performance Ford · software Достоверность данных 94%

Ford documents P060A:75 for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module a/d processing performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P060A:81
Serial Communication Link Ford · network Достоверность данных 94%

Ford documents P060A:81 for its 2024-2025 gasoline-engine OBD monitor strategy as serial communication link. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P060A:A1
Internal Control Module A/D Processing Performance Ford · software Достоверность данных 94%

Ford documents P060A:A1 for its 2024-2025 gasoline-engine OBD monitor strategy as internal control module a/d processing performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years

Связанные и соседние коды

Как читать P060A

P

Силовой агрегат: двигатель, коробка и трансмиссия.

0

Общий код стандарта SAE: одинаковое значение у всех марок.

60A

Конкретный индекс неисправности внутри подсистемы.

Частые вопросы о P060A

Что означает P060A?

Диагностический код неисправности (6 вариантов). The control module judged the Internal Control Module Monitoring Processor behaviour implausible for the current operating conditions.

P060A — общий код или специфичный для производителя?

P060A существует и как общий код OBD-II (одинаковое значение у всех марок), и с 1 интерпретациями производителей: Ford. Всегда читайте его в контексте вашего автомобиля.

Может ли TuningBot удалить P060A на уровне файла?

Если логика неисправности заложена в калибровке ЭБУ — да: наша услуга DTC Removal отключает конкретную запись ошибки. Коррекция checksum не входит в услугу: это отдельная опциональная услуга. Не уверены, подходит ли ваш случай? Запросите бесплатную оценку, и наши инженеры проверят ваш файл.

Другие услуги по файлу

Чип-тюнингРезультаты Stage 1 на стенде для двигателей Ford Смотреть результаты →

← Искать по всей базе DTC