Часы работы: 07–23 ежедневно

База данных DTC TuningBot · v4.37.15

P0100 Диагностический код неисправности (5 вариантов)

Общая (OBD-II) интерпретация + 1 специфичных для производителя в базе DTC TuningBot.

P · Силовой агрегатEngineOBD2
Страницы по маркам:Ford

Общая (OBD-II) интерпретация

P0100
Mass or Volume Air flow Circuit Malfunction Общий · engine Достоверность данных 90%

The control module detected improper operation of the Mass or Volume Air flow circuit.

Симптомы

  • MIL illuminated
  • Possible hesitation or poor throttle response
  • Possible incorrect fuel trim values

Возможные причины

  • Wiring
  • MAF/VAF sensor
  • ECM

Рекомендуемые проверки

  • Compare measured air mass with expected values at idle and load
  • Inspect intake ducting for leaks after the sensor
  • Inspect wiring and connectors
  • Check fuel trim values for confirmation

Интерпретации производителей

Ford

5 интерпретаций
P0100:01
(sensor faulted) Ford · engine Достоверность данных 94%

Ford documents P0100:01 for its 2024-2025 gasoline-engine OBD monitor strategy as (sensor faulted). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0100:11
(low input) Ford · engine Достоверность данных 94%

Ford documents P0100:11 (circuit short to ground) for its 2024-2025 gasoline-engine OBD monitor strategy as (low input). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0100:15
(high input) Ford · engine Достоверность данных 94%

Ford documents P0100:15 for its 2024-2025 gasoline-engine OBD monitor strategy as (high input). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0100:1F
(intermittent) Digital MAF Sensor B Ford · engine Достоверность данных 94%

Ford documents P0100:1F for its 2024-2025 gasoline-engine OBD monitor strategy as (intermittent) digital maf sensor b. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years
P0100:92
(input out of range / performance) Ford · engine Достоверность данных 94%

Ford documents P0100:92 for its 2024-2025 gasoline-engine OBD monitor strategy as (input out of range / performance). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Применимо к Ford gasoline-engine OBD applications|2024-2025 model years

Связанные и соседние коды

Как читать P0100

P

Силовой агрегат: двигатель, коробка и трансмиссия.

0

Общий код стандарта SAE: одинаковое значение у всех марок.

100

Конкретный индекс неисправности внутри подсистемы.

Частые вопросы о P0100

Что означает P0100?

Диагностический код неисправности (5 вариантов). The control module detected improper operation of the Mass or Volume Air flow circuit.

P0100 — общий код или специфичный для производителя?

P0100 существует и как общий код OBD-II (одинаковое значение у всех марок), и с 1 интерпретациями производителей: Ford. Всегда читайте его в контексте вашего автомобиля.

Может ли TuningBot удалить P0100 на уровне файла?

Если логика неисправности заложена в калибровке ЭБУ — да: наша услуга DTC Removal отключает конкретную запись ошибки. Коррекция checksum не входит в услугу: это отдельная опциональная услуга. Не уверены, подходит ли ваш случай? Запросите бесплатную оценку, и наши инженеры проверят ваш файл.

Другие услуги по файлу

Чип-тюнингРезультаты Stage 1 на стенде для двигателей Ford Смотреть результаты →

← Искать по всей базе DTC