Horário: 07h–23h diariamente

Base de dados DTC TuningBot · v4.37.15

U0602 Lost Communication With Particulate Filter Pressure Sensor B

Interpretação genérica (OBD-II) + 1 específicas do fabricante na base de dados DTC TuningBot.

U · RedeEmissionsOBD2
Páginas por marca:Ford

Interpretação genérica (OBD-II)

U0602
Lost Communication With Particulate Filter Pressure Sensor B Genérico · emissions Fiabilidade do dado 65%

The control module stopped receiving expected network messages from the Particulate Filter Pressure Sensor B node on the vehicle communication bus.

Sintomas

  • MIL or DPF warning illuminated
  • Possible reduced power or limp mode
  • Possible frequent regeneration attempts

Causas possíveis

  • Excessive soot load beyond regeneration limits
  • Differential pressure sensor or hose fault
  • Failed or interrupted regenerations (short trips)
  • Exhaust leak upstream of the sensor
  • Underlying engine fault increasing soot output

Verificações recomendadas

  • Read soot load, ash load and differential pressure values
  • Check differential pressure sensor and hoses
  • Verify exhaust gas temperature sensor readings
  • Check for related injection, EGR or boost codes
  • Verify regeneration conditions can be met (trip profile)

Interpretações específicas do fabricante

Ford

1 interpretação
U0602:00
Lost Communication with Particulate Filter Pressure Sensor "B" Ford · network Fiabilidade do dado 94%

Ford documents U0602:00 (no sub type information) for its 2024-2025 gasoline-engine OBD monitor strategy as lost communication with particulate filter pressure sensor "b". This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Verificações recomendadas

  • Perform a full module scan
  • Verify battery voltage
  • Check module power supplies and grounds
  • Inspect network wiring and connectors
  • Measure network resistance with power isolated
  • Check applicable OEM service information
Aplica-se a Ford gasoline-engine OBD applications|2024-2025 model years

Códigos relacionados e próximos

Como se lê U0602

U

Rede: comunicação entre centralinas.

0

Código genérico padrão SAE: mesmo significado em qualquer marca.

602

Índice específico da avaria dentro do subsistema.

Perguntas frequentes sobre U0602

O que significa U0602?

Lost Communication With Particulate Filter Pressure Sensor B. The control module stopped receiving expected network messages from the Particulate Filter Pressure Sensor B node on the vehicle communication bus.

U0602 é genérico ou específico do fabricante?

U0602 existe tanto como código genérico OBD-II (mesmo significado em qualquer marca) como com 1 interpretações específicas do fabricante: Ford. Leia-o sempre no contexto do seu veículo.

A TuningBot consegue remover U0602 ao nível do ficheiro?

Não garantido. Os códigos powertrain (P) desativam-se de forma fiável na calibração da ECU, mas os de carroçaria, chassis e rede dependem da centralina e de como a avaria está implementada - alguns são tratáveis, outros não. Peça um orçamento e os nossos engenheiros verificam o ficheiro e dizem-lhe gratuitamente se U0602 é removível no seu caso.

Outros serviços de ficheiro

RemapeamentoResultados Stage 1 no dinamômetro para motores Ford Ver os resultados →

← Pesquisar em toda a base de dados DTC