The TuningBot Method
The performance of an internal combustion engine hinges on three key elements: fuel delivery, air supply, and ignition timing. These factors must work in harmony, and it’s the electronic engine management system’s job to balance them. It continuously adjusts fuel quantity, airflow, and spark timing while applying safety filters and limiters to protect your engine.

At TuningBot, we enhance your engine’s efficiency by optimizing the combustion process—never by guessing or “boost-and-go” tricks. Every adjustment is guided by real-time measurements, precise calculations, and thorough data logging. We always preserve the original manufacturer’s architecture and reliability standards, so you gain power and torque without compromising durability. Once you leave our workshop, you’ll immediately feel the difference: stronger acceleration, smoother throttle response, and improved everyday drivability.

---

Air–Fuel Ratio (Lambda)

Before any changes, we measure your engine’s stock air–fuel ratio. After tuning, we retest to ensure we’ve achieved the ideal balance. An incorrect lambda—whether from a mechanical issue or a sloppy remap—can lead to poor performance or even engine damage.

---

Temperatura do ar de admissão

We record intake-air temperatures during our test runs to confirm that your engine breathes cool, dense air. Aftermarket filters installed improperly can pull in heat-soaked air, causing power loss and dangerously high under-hood temperatures. Our data logging catches and corrects that.

---

Oil, Fuel & Coolant Temperatures

Monitoring these temperatures ensures that our tune keeps your engine’s operating conditions within safe limits. We log all three during each session to verify that nothing overheats under load.

---

Ignition Timing for Gasoline Engines

Boost and injection tweaks alone won’t unlock your engine’s potential—you need to fine-tune the spark timing, too. Advancing or retarding the ignition in sync with our other changes yields cleaner, more powerful combustion. This not only boosts horsepower and torque but also protects your exhaust system and turbocharger.

Why data logging matters:

• No guesswork. Many tuners simply crank up boost or load off-the-shelf maps without testing.

• OEM-level logic. We align every adjustment with the manufacturer’s original design to avoid inefficient—or harmful—tuning choices.

• Complete verification. During every remap, we track air–fuel ratio, boost, ignition timing, and temperatures. That thoroughness is what keeps your ride reliable.

---

Turbocharger Pressure

Requested boost vs. actual boost can differ, especially on a worn unit. We measure baseline pressure, apply our calibrated adjustments, then re-test to confirm you’re getting exactly the boost you expect—nothing more, nothing less. Over-pressurizing, a common diesel-tuning mistake, only accelerates wear and risks failure.

---

Exhaust Gas Temperature (EGT)

High EGTs can fry your turbo and exhaust components. By logging intake and exhaust temps side by side, we detect any software hiccups or mechanical faults before they cause serious damage.

---

Injection Timing for Diesel Engines

In diesels, extending injection duration is only half the story. Pinpointing the exact moment of fuel delivery shapes a stronger combustion wave and maximizes your torque curve. Our precision tuning supports your DPF, turbo, and overall engine health.

---

Real-World Benefits You’ll Feel

Some tuners only optimize at full throttle, but most driving happens at partial throttle. We calibrate your map so that you experience noticeable gains in everyday situations—pulling away from a stoplight, cruising on the highway, or overtaking in traffic—without ever needing 100 % throttle to feel the difference.

---

Safety First
Every adjustment stays within your engine’s safe operating envelope. A quality remap respects those limits—anything else is simply not worth the risk.