ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
PSA 1.2 THP Remap & Chiptuning – Peugeot 208 1.2 PureTech, 308, Citroën C3
Covers the PSA group: Peugeot, Citroën, DS.
Professional ECU tuning and remapping for the PSA 1.2 THP petrol engine. Our dyno-tested Stage 1 and Stage 2 calibrations sharpen throttle response and power delivery, with options such as Pop & Bang, GPF/OPF off and limiter changes for supported ECUs.
Engine codes: EB2 1.2 PureTech
Fitted to Peugeot 208 1.2 PureTech308Citroën C3
Performance Gains (Dyno-Tested)
| Engine | Stock | Tuned | HP Gain | Torque Gain | ECU | Order |
|---|---|---|---|---|---|---|
| 1.2 THP | 100 hp | 131 hp | +31 hp +31% | +48 Nm | MG1CS032Stage 1 | Order file → |
| 1.2 THP | 110 hp | 135 hp | +25 hp +23% | +47 Nm | VALEO VD 46Stage 1 | Order file → |
| 1.2 THP | 130 hp | 143 hp | +13 hp +10% | +37 Nm | VALEO VD 46Stage 1 | Order file → |
| 1.2 THP | 100 hp | 130 hp | +30 hp +30% | +49 Nm | VALEO VD 56Stage 1 | Order file → |
| 1.2 THP | 110 hp | 131 hp | +21 hp +19% | +46 Nm | VALEO VD 56Stage 1 | Order file → |
| 1.2 THP | 130 hp | 145 hp | +15 hp +12% | +48 Nm | VALEO VD 56Stage 1 | Order file → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Cars this engine is fitted to
Peugeot, 308, Citroën C3, DS DS3 Crossback, Opel Combo, Peugeot 2008 and 7 more across Citroën, DS, Opel and Peugeot
Opel · 2
DS · 1Measured here, tunable everywhere
The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.
Supported ECU(s): MG1CS032, VALEO VD 46, VALEO VD 56
Frequently Asked Questions
How much power can a PSA 1.2 THP gain with Stage 1 tuning?
Stage 1 ECU tuning for the PSA 1.2 THP can add up to +31 hp and +49 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.
How do I order and how fast is the tuning file delivered?
Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).
Is the PSA 1.2 THP tuning file plug-and-play?
You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.
Order your PSA 1.2 THP tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23