Hours: 07–23 daily

Jeep Renegade ECU Tuning: Stage 1 Gains by Engine

Dyno-tested Stage 1 results for every Jeep Renegade engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.

8 engines measured
+42 hp best Stage 1 gain · 2.0D
20 ECU services

Stage 1 gains by engine

Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.

EngineStockHP GainTorque GainDetails
1.0 FIREFLY petrol120 hp+21 hp+44 Nm
1.3 FIREFLY petrol150 hp+15 hp+36 Nm
1.4 MultiAir petrol135–170 hp+19 hp+42 Nm
1.6 MJET diesel120–130 hpfrom +21 to +30 hp+63 Nm
1.6D diesel120–140 hpfrom +21 to +27 hp+53 Nm
1.6D diesel120 hp+26 hp+61 Nm
2.0 MJET diesel115–175 hpfrom +27 to +42 hp+80 Nm
2.0D diesel140–170 hpfrom +30 to +42 hp+80 Nm

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Measured by version

Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.

VersionEngineECUStockHP GainTorque GainOrder
Jeep Renegade diesel2.0DEDC17C69140 hp+42 hp. 182 hp · +30%+58 NmOrder file →
Jeep Renegade1.3 FIREFLYGPEC4LM150 hp+30 hp 180 hp · +20%+50 NmOrder file →
Jeep Renegade diesel2.0DEDC17C69170 hp+28 hp. 198 hp · +16%+62 NmOrder file →
Jeep Renegade diesel1.6DEDC17C69120 hp+27 hp. 147 hp · +23%+61 NmOrder file →
Jeep Renegade1.0 FIREFLYGPEC4LM120 hp+20 hp 140 hp · +17%+60 NmOrder file →
Jeep Renegade1.3 FIREFLYGPEC4LM180 hp+20 hp 200 hp · +11%+50 NmOrder file →
Jeep Renegade petrolMM8GMK140 hp+19 hp. 159 hp · +14%+42 NmOrder file →
Jeep Renegade petrolMM8GMK170 hp+16 hp. 186 hp · +9%+27 NmOrder file →
Jeep RenegadeMM10GF135 hp+11 hp 146 hp · +8%+20 NmOrder file →
Jeep Renegade9GF112 hp+5 hp 117 hp · +4%+8 NmOrder file →

5 more versions of the Jeep Renegade are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →

Measured here, tunable everywhere

The Jeep Renegade engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Jeep Renegade or otherwise. If your engine is not on this list, upload the original file anyway.

Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.

Tune your file →

ECU services available on Jeep Renegade

Solutions supported on the ECUs fitted to this model. Each engine page lists exactly which ones apply to its control units.

Frequently Asked Questions

Which Jeep Renegade engines can be remapped?

The 8 engines in the table above were measured on our dyno: 1.0 FIREFLY, 1.3 FIREFLY, 1.4 MultiAir, 1.6 MJET, 1.6D, 1.6D, 2.0 MJET and 2.0D. Other Jeep Renegade engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.

How much power does a Stage 1 add on a Jeep Renegade?

Between +5 and +42 hp depending on the engine; the best result measured is +42 hp on the 2.0D. Every figure is a dyno reading on stock hardware, not an estimate.

Do I have to send the Jeep Renegade ECU?

No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in minutes to write into the car. Only the file travels.

Order your Jeep Renegade tuning file

Upload your original ECU file and receive a professional calibration in minutes.

Tune Your File →

v4.31.28