ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Iveco 2.3 D Remap & Chiptuning – Daily 2.3
Professional ECU tuning and remapping for the Iveco 2.3 D diesel engine. Our dyno-tested Stage 1 calibrations improve torque delivery, throttle response and drivability, with optional DPF, EGR and AdBlue/SCR solutions for supported ECUs.
Engine codes: F1AE / F1AGL411
Fitted to Daily 2.3
Performance Gains (Dyno-Tested)
| Engine | Stock | Tuned | HP Gain | Torque Gain | ECU | Order |
|---|---|---|---|---|---|---|
| 2.3 D | 116 hp | 143 hp | +27 hp +23% | +55 Nm | EDC16C39Stage 1 | Order file → |
| 2.3 D | 106 hp | 139 hp | +33 hp +31% | +78 Nm | EDC17C49Stage 1 | Order file → |
| 2.3 D | 136 hp | 167 hp | +31 hp +23% | +77 Nm | EDC17C49Stage 1 | Order file → |
| 2.3 D | 156 hp | 179 hp | +23 hp +15% | +63 Nm | EDC17C49Stage 1 | Order file → |
| 2.3 D | 116 hp | 152 hp | +36 hp +31% | +62 Nm | EDC17C69Stage 1 | Order file → |
| 2.3 D | 136 hp | 167 hp | +31 hp +23% | +58 Nm | EDC17C69Stage 1 | Order file → |
| 2.3 D | 156 hp | 185 hp | +29 hp +19% | +69 Nm | MD1CS069Stage 1 | Order file → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Cars this engine is fitted to
Daily, Alfa Romeo Giulia, Fase Uno Volpino, Fiat Ducato, Hyundai Santa Fe and Uaz Patriot
Iveco · 3Measured here, tunable everywhere
The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.
Available ECU Services for this Engine
The following solutions are supported on the ECU(s) of this vehicle (Diesel):
Technical Notes per ECU
Disconnection and read requirements differ by ECU. The notes below apply to the specific ECU listed; the exact removal scope per service is confirmed on each service page.
Each note is tagged with the service it refers to and applies to the ECU it is listed under. Mechanical preparation is the installer's responsibility. Emission-related solutions are for off-road or motorsport use where permitted by law.
Supported ECU(s): EDC16C39, EDC17C49, EDC17C69, MD1CS069
Frequently Asked Questions
How much power can a Iveco 2.3 D gain with Stage 1 tuning?
Stage 1 ECU tuning for the Iveco 2.3 D can add up to +36 hp and +78 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.
Can DPF, EGR and AdBlue/SCR be removed on the Iveco 2.3 D?
DPF, EGR and AdBlue/SCR off is supported on the ECU(s) of this vehicle, strictly for off-road or motorsport use where permitted by law. The exact mechanical preparation and sensor handling are listed per ECU in the technical notes below.
How do I order and how fast is the tuning file delivered?
Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).
Is the Iveco 2.3 D tuning file plug-and-play?
You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.
Order your Iveco 2.3 D tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23