Ford 1.6 HDI Remap & Chiptuning – Focus Mk2, C-Max, Fiesta Mk6

Professional ECU tuning and remapping for the Ford 1.6 HDI diesel engine. Our dyno-tested Stage 1 calibrations improve torque delivery, throttle response and drivability, with optional DPF, EGR and AdBlue/SCR solutions for supported ECUs.

Engine codes: DV6 1.6 TDCi

Fitted to Focus Mk2 C-Max Fiesta Mk6

+21 hp Best Stage 1 power gain

+48 Nm Best Stage 1 torque gain

1 ECU variant covered

Diesel Fuel type

Performance Gains (Dyno-Tested)

Engine	Stock	Tuned	HP Gain	Torque Gain	ECU	Order
1.6 HDI	115 hp	136 hp	+21 hp +18%	+48 Nm	SID807Stage 1	Order file →

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Cars this engine is fitted to

Focus Mk2, C-Max, Fiesta Mk6, Citroën C4, Ford Galaxy, Peugeot 2008 and 10 more across Citroën, Ford and Peugeot

Peugeot · 7

207 208 308 508 2008 3008 5008

Ford · 6

C-Max Fiesta Mk6 Focus Mk2 Galaxy Mondeo Transit Connect

Citroën · 3

C4 DS3 DS4

Fitment is read from the ECU part numbers in our own database, not from a generic catalogue. The same engine and control unit are fitted to several cars, which is why one page serves them all.

Measured here, tunable everywhere

The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.

Available ECU Services for this Engine

The following solutions are supported on the ECU(s) of this vehicle (Diesel):

DTC Removal

Supported ECU(s): SID807

Frequently Asked Questions

How much power can a Ford 1.6 HDI gain with Stage 1 tuning?

Stage 1 ECU tuning for the Ford 1.6 HDI can add up to +21 hp and +48 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.

Which tuning solutions are available for the Ford 1.6 HDI?

Supported solutions for the ECU(s) of this vehicle include DTC Removal. Each is applied to your original ECU file; any emission-related solution is intended for off-road or motorsport use where permitted by law.

How do I order and how fast is the tuning file delivered?

Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).

Is the Ford 1.6 HDI tuning file plug-and-play?

You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.

Order your Ford 1.6 HDI tuning file

Upload your original ECU file and receive a professional calibration in 15-20 minutes.

Tune Your File →

← See all dyno results

v4.31.23