Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P04F6 Catalyst Heater Circuit High Bank 1

Generic (OBD-II) interpretation in the TuningBot DTC database.

P · PowertrainEmissionsOBD2

What P04F6 means

P04F6
Catalyst Heater Circuit High Bank 1 Generic · emissions Data confidence 65%

The control module detected that the signal in the Catalyst Heater circuit stayed above the expected operating range.

Symptoms

  • MIL illuminated
  • Possible smell of unburnt fuel or reduced performance in severe cases

Possible causes

  • Aged or damaged catalytic converter
  • Downstream oxygen sensor fault giving a wrong efficiency reading
  • Exhaust leak
  • Misfire or mixture fault overloading the catalyst

Recommended checks

  • Compare upstream and downstream oxygen sensor signals
  • Check for exhaust leaks
  • Check for stored misfire or mixture codes first
  • Verify catalyst temperature plausibility where available

Related and nearby codes

How to read P04F6

P

Powertrain: engine, transmission and driveline systems.

0

Generic SAE-standard code: same meaning on every make.

4F6

Specific fault index within the subsystem.

Frequently asked questions about P04F6

What does P04F6 mean?

Catalyst Heater Circuit High Bank 1. The control module detected that the signal in the Catalyst Heater circuit stayed above the expected operating range.

Is P04F6 generic or manufacturer-specific?

P04F6 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove P04F6 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database