Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P0403 Diagnostic Trouble Code (4 variants)

Generic (OBD-II) interpretation + 1 manufacturer-specific in the TuningBot DTC database.

P · PowertrainEmissionsOBD2
Brand pages:Ford

Generic (OBD-II) interpretation

P0403
Exhaust Gas Recirculation Circuit Malfunction Generic · emissions Data confidence 90%

The control module detected improper operation of the Exhaust Gas Recirculation circuit.

Symptoms

  • MIL illuminated
  • Possible reduced engine performance
  • Possible rough idle or hesitation

Possible causes

  • Wiring
  • EGR solenoid
  • ECM

Recommended checks

  • Read freeze frame data and full module scan
  • Check battery voltage and sensor supply
  • Inspect EGR wiring and connectors
  • Compare commanded vs actual EGR position/flow with live data
  • Inspect EGR valve and passages for carbon build-up
  • Check related vacuum lines where fitted

Manufacturer-specific interpretations

Ford

4 interpretations
P0403:1D
EGR "A" Control Temperature Too High Ford · emissions Data confidence 94%

Ford documents P0403:1D for its 2024-2025 gasoline-engine OBD monitor strategy as egr "a" control temperature too high. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years
P0403:72
EGR "A" Control Stuck Open Ford · emissions Data confidence 94%

Ford documents P0403:72 (actuator stuck open) for its 2024-2025 gasoline-engine OBD monitor strategy as egr "a" control stuck open. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years
P0403:73
EGR "A" Control Stuck Closed Ford · emissions Data confidence 94%

Ford documents P0403:73 for its 2024-2025 gasoline-engine OBD monitor strategy as egr "a" control stuck closed. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years
P0403:92
EGR “A” Control Stuck Ford · emissions Data confidence 94%

Ford documents P0403:92 for its 2024-2025 gasoline-engine OBD monitor strategy as egr “a” control stuck. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information
Applies to Ford gasoline-engine OBD applications|2024-2025 model years

Related and nearby codes

How to read P0403

P

Powertrain: engine, transmission and driveline systems.

0

Generic SAE-standard code: same meaning on every make.

403

Specific fault index within the subsystem.

Frequently asked questions about P0403

What does P0403 mean?

Diagnostic Trouble Code (4 variants). The control module detected improper operation of the Exhaust Gas Recirculation circuit.

Is P0403 generic or manufacturer-specific?

P0403 exists both as a generic OBD-II code (same meaning on every make) and with 1 manufacturer-specific interpretation(s): Ford. Always read it in the context of your vehicle.

Can TuningBot remove P0403 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningStage 1 dyno results for Ford engines See the results →

← Search the full DTC database