P040FExhaust Gas Recirculation Temperature Sensor "A"/"B" Correlation
Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P040F means
P040F
Exhaust Gas Recirculation Temperature Sensor "A"/"B" Correlation
Generic · emissions
Data confidence78%
The control module detected a fault associated with the Exhaust Gas Recirculation Temperature Sensor "A"/"B" Correlation circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL illuminated
Possible reduced engine performance
Possible rough idle or hesitation
Possible causes
Carbon-blocked EGR passages
Sticking or slow EGR valve
EGR actuator or position sensor fault
Wiring or connector fault
Vacuum supply fault (vacuum-operated systems)
Recommended checks
Read freeze frame data and full module scan
Check battery voltage and sensor supply
Inspect EGR wiring and connectors
Compare commanded vs actual EGR position/flow with live data
Inspect EGR valve and passages for carbon build-up
Powertrain: engine, transmission and driveline systems.
0
Generic SAE-standard code: same meaning on every make.
40F
Specific fault index within the subsystem.
Frequently asked questions about P040F
What does P040F mean?
Exhaust Gas Recirculation Temperature Sensor "A"/"B" Correlation. The control module detected a fault associated with the Exhaust Gas Recirculation Temperature Sensor "A"/"B" Correlation circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P040F generic or manufacturer-specific?
P040F is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P040F at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.