Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P0444 Evaporative Emission Control System Purge Control Valve Circuit Open

Generic (OBD-II) interpretation in the TuningBot DTC database.

P · PowertrainEmissionsOBD2

What P0444 means

P0444
Evaporative Emission Control System Purge Control Valve Circuit Open Generic · emissions Data confidence 90%

The control module detected an interruption (open circuit) in the Evaporative Emission Control System Purge Control Valve circuit, so the expected electrical continuity was not present.

Symptoms

  • MIL illuminated
  • Possible fuel smell in case of larger leaks

Possible causes

  • Wiring open circuit
  • EVAP canister purge valve
  • ECM

Recommended checks

  • Check fuel filler cap seating first
  • Read fuel tank pressure sensor values
  • Actuate purge and vent valves and verify response
  • Smoke-test the EVAP system for leaks

Related and nearby codes

How to read P0444

P

Powertrain: engine, transmission and driveline systems.

0

Generic SAE-standard code: same meaning on every make.

444

Specific fault index within the subsystem.

Frequently asked questions about P0444

What does P0444 mean?

Evaporative Emission Control System Purge Control Valve Circuit Open. The control module detected an interruption (open circuit) in the Evaporative Emission Control System Purge Control Valve circuit, so the expected electrical continuity was not present.

Is P0444 generic or manufacturer-specific?

P0444 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove P0444 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database