P0435Catalyst Temperature Sensor Circuit Bank 2 Sensor 1
Generic (OBD-II) interpretation in the TuningBot DTC database.
P · PowertrainEmissionsOBD2
What P0435 means
P0435
Catalyst Temperature Sensor Circuit Bank 2 Sensor 1
Generic · emissions
Data confidence90%
The control module detected a fault associated with the Catalyst Temperature Sensor Circuit Bank 2 Sensor 1 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Symptoms
MIL illuminated
Possible smell of unburnt fuel or reduced performance in severe cases
Possible causes
Wiring
poor connection
catalytic converter temperature sensor
ECM
Recommended checks
Compare upstream and downstream oxygen sensor signals
Check for exhaust leaks
Check for stored misfire or mixture codes first
Verify catalyst temperature plausibility where available
Powertrain: engine, transmission and driveline systems.
0
Generic SAE-standard code: same meaning on every make.
435
Specific fault index within the subsystem.
Frequently asked questions about P0435
What does P0435 mean?
Catalyst Temperature Sensor Circuit Bank 2 Sensor 1. The control module detected a fault associated with the Catalyst Temperature Sensor Circuit Bank 2 Sensor 1 circuit or function; the stored code identifies the affected component rather than a single failure mode.
Is P0435 generic or manufacturer-specific?
P0435 is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.
Can TuningBot remove P0435 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU