PSA 2.0 HDI Remap & Chiptuning – Peugeot 3008 2.0 HDi, 508, Citroën C5

Covers the PSA group: Peugeot, Citroën, DS.

Professional ECU tuning and remapping for the PSA 2.0 HDI diesel engine. Our dyno-tested Stage 1 calibrations improve torque delivery, throttle response and drivability, with optional DPF, EGR and AdBlue/SCR solutions for supported ECUs.

Engine codes: DW10 2.0 HDi

Fitted to Peugeot 3008 2.0 HDi508Citroën C5

+32 hp Best Stage 1 power gain

+59 Nm Best Stage 1 torque gain

2 ECU variants covered

Diesel Fuel type

Performance Gains (Dyno-Tested)

Engine	Stock	Tuned	HP Gain	Torque Gain	ECU	Order
2.0 HDI	140 hp	167 hp	+27 hp +19%	+59 Nm	DCM3.4Stage 1	Order file →
2.0 HDI	150 hp	182 hp	+32 hp +21%	+53 Nm	DCM3.5Stage 1	Order file →
2.0 HDI	163/165 hp	184/186 hp	+21 hp +13%	+37 Nm	DCM3.5Stage 1	Order file →

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Cars this engine is fitted to

Peugeot 3008, 508, Citroën C5, Fiat Scudo, Ford C-Max, Peugeot 307 and 17 more across Citroën, Fiat, Ford and Peugeot

Peugeot · 9

307 308 407 508 807 3008 5008 ExpertRCZ

Citroën · 8

C4 C5C8Dispatch DS4 DS5 Jumper Jumpy

Ford · 5

C-Max Galaxy Kuga Mondeo S-Max

Fiat · 1

Scudo

Fitment is read from the ECU part numbers in our own database, not from a generic catalogue. The same engine and control unit are fitted to several cars, which is why one page serves them all.

Measured here, tunable everywhere

The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.

Supported ECU(s): DCM3.4, DCM3.5

Frequently Asked Questions

How much power can a PSA 2.0 HDI gain with Stage 1 tuning?

Stage 1 ECU tuning for the PSA 2.0 HDI can add up to +32 hp and +59 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.

How do I order and how fast is the tuning file delivered?

Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).

Is the PSA 2.0 HDI tuning file plug-and-play?

You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.

Order your PSA 2.0 HDI tuning file

Upload your original ECU file and receive a professional calibration in 15-20 minutes.

Tune Your File →

← See all dyno results

v4.31.23