Mini 1.5 TURBO HYBRID Remap & Chiptuning – Countryman Cooper S E ALL4, BMW 225xe

Professional ECU tuning and remapping for the Mini 1.5 TURBO HYBRID petrol engine. Our dyno-tested Stage 1 and Stage 2 calibrations sharpen throttle response and power delivery, with options such as Pop & Bang, GPF/OPF off and limiter changes for supported ECUs.

Engine codes: B38A15 PHEV

Fitted to Countryman Cooper S E ALL4BMW 225xe

+33 hp Best Stage 1 power gain

+74 Nm Best Stage 1 torque gain

1 ECU variant covered

Petrol Fuel type

Performance Gains (Dyno-Tested)

Engine	Stock	Tuned	HP Gain	Torque Gain	ECU	Order
1.5 TURBO HYBRID	136 hp	169 hp	+33 hp +24%	+74 Nm	MEVD17.2.RStage 1	Order file →

Figures are dyno-tested averages and may vary with hardware condition and fuel quality.

Cars this engine is fitted to

Countryman Cooper S E ALL4 and BMW 225xe

Mini · 1

Countryman Cooper S E ALL4

BMW · 1

225xe

Fitment is read from the ECU part numbers in our own database, not from a generic catalogue. The same engine and control unit are fitted to several cars, which is why one page serves them all.

Measured here, tunable everywhere

The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.

Supported ECU(s): MEVD17.2.R

Frequently Asked Questions

How much power can a Mini 1.5 TURBO HYBRID gain with Stage 1 tuning?

Stage 1 ECU tuning for the Mini 1.5 TURBO HYBRID can add up to +33 hp and +74 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.

How do I order and how fast is the tuning file delivered?

Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).

Is the Mini 1.5 TURBO HYBRID tuning file plug-and-play?

You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.

Order your Mini 1.5 TURBO HYBRID tuning file

Upload your original ECU file and receive a professional calibration in 15-20 minutes.

Tune Your File →

← See all dyno results

v4.31.23