ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Fiat 500 ECU Tuning: Stage 1 Gains by Engine
Dyno-tested Stage 1 results for every Fiat 500 engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.
Stage 1 gains by engine
Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.
| Engine | Stock | HP Gain | Torque Gain | Details |
|---|---|---|---|---|
| 1.3 MJET diesel | 75–95 hp | from +19 to +24 hp | +46 Nm | Engine page → |
| 1.3D diesel | 75 hp | from +20 to +24 hp | +44 Nm | Engine page → |
| 1.4 16V petrol | 78 hp | +24 hp | n/a | Engine page → |
| 1.4 TJET petrol | 105–120 hp | from +23 to +38 hp | +74 Nm | Engine page → |
| 1.6 MJET diesel | 105–120 hp | from +21 to +30 hp | +63 Nm | Engine page → |
| 1.6D diesel | 120–140 hp | from +21 to +27 hp | +53 Nm | Engine page → |
| 1.6D diesel | 120 hp | +26 hp | +61 Nm | Engine page → |
| 2.0 MJET diesel | 115–170 hp | from +27 to +42 hp | +80 Nm | Engine page → |
| 2.0D diesel | 140–170 hp | from +30 to +42 hp | +80 Nm | Engine page → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Measured by version
Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.
| Version | Engine | ECU | Stock | HP Gain | Torque Gain | Order |
|---|---|---|---|---|---|---|
| Fiat 500 diesel | 2.0 MJET | EDC17C69 | 140 hp | +42 hp. 182 hp · +30% | +58 Nm | Order file → |
| Fiat 500 diesel | 2.0 MJET | EDC17C69 | 141 hp | +42 hp. 183 hp · +30% | +58 Nm | Order file → |
| Fiat 500 diesel | 1.6 MJET | EDC17C69 | 120 hp | +27 hp. 147 hp · +23% | +61 Nm | Order file → |
| Fiat 500 diesel | 1.6 MJET | EDC17C49 | 120 hp | +26 hp. 146 hp · +22% | +61 Nm | Order file → |
| Fiat 500 diesel | MJ8F3 | 85 hp | +25 hp 110 hp · +29% | +50 Nm | Order file → | |
| Fiat 500 petrol | MM8GMW | 165 hp | +25 hp 190 hp · +15% | +50 Nm | Order file → | |
| Fiat 500 diesel | 1.3 MJET | MJD6 | 75 hp | +22 hp. 97 hp · +29% | +42 Nm | Order file → |
| Fiat 500 diesel | 1.6 MJET | EDC17C49 | 105 hp | +21 hp. 126 hp · +20% | +37 Nm | Order file → |
| Fiat 500 | MM8GSW | 80 hp | +20 hp 100 hp · +25% | +40 Nm | Order file → | |
| Fiat 500 diesel | MJ8DF | 95 hp | +20 hp 115 hp · +21% | +50 Nm | Order file → | |
| Fiat 500 diesel | MJ9DF | 95 hp | +20 hp 115 hp · +21% | +50 Nm | Order file → | |
| Fiat 500 | GPEC4LM | 120 hp | +20 hp 140 hp · +17% | +60 Nm | Order file → | |
| Fiat 500 petrol | MM8GSF | 85 hp | +10 hp 95 hp · +12% | +45 Nm | Order file → | |
| Fiat 500 | MM8GSW | 85 hp | +10 hp 95 hp · +12% | +45 Nm | Order file → | |
| Fiat 500 | 9GF | 69 hp | +6 hp 75 hp · +9% | +10 Nm | Order file → | |
| Fiat 500 petrol | IAW5SF | 69 hp | +6 hp 75 hp · +9% | +10 Nm | Order file → | |
| Fiat 500 | MM8GSW | 105 hp | +5 hp 110 hp · +5% | +45 Nm | Order file → |
12 more versions of the Fiat 500 are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →
Measured here, tunable everywhere
The Fiat 500 engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Fiat 500 or otherwise. If your engine is not on this list, upload the original file anyway.
Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.
ECU services available on Fiat 500
Solutions supported on the ECUs fitted to this model. Each engine page lists exactly which ones apply to its control units.
Frequently Asked Questions
Which Fiat 500 engines can be remapped?
The 9 engines in the table above were measured on our dyno: 1.3 MJET, 1.3D, 1.4 16V, 1.4 TJET, 1.6 MJET, 1.6D, 1.6D, 2.0 MJET and 2.0D. Other Fiat 500 engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.
How much power does a Stage 1 add on a Fiat 500?
Between +5 and +42 hp depending on the engine; the best result measured is +42 hp on the 2.0 MJET. Every figure is a dyno reading on stock hardware, not an estimate.
Do I have to send the Fiat 500 ECU?
No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.
Order your Fiat 500 tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23