Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P1599 Diagnostic Trouble Code (3 interpretations)

3 manufacturer-specific interpretations across 2 manufacturers in the TuningBot DTC database.

P · PowertrainEngineOBD2
Brand pages:PSAVAG

PSA

1 interpretation
P1599
Cooling circuit by-pass electrovalve PSA · engine Data confidence 72%

The stored code identifies a fault of the Cooling circuit by-pass electrovalve. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

Applies to Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

VAG

2 interpretations
P1599
Idle control - lean running speed above specification VAG · engine Data confidence 62%

The control module detected a fault associated with the Idle control - lean running speed above specification circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Audi.

Possible causes

IAC valve

Applies to Audi
P1599
Idle control - lean running speed above specification VAG · engine Data confidence 62%

The control module detected a fault associated with the Idle control - lean running speed above specification circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen.

Possible causes

IAC valve

Applies to Volkswagen

Related and nearby codes

How to read P1599

P

Powertrain: engine, transmission and driveline systems.

1

Manufacturer-defined range: the meaning can differ between brands.

599

Specific fault index within the subsystem.

Frequently asked questions about P1599

What does P1599 mean?

Diagnostic Trouble Code (3 interpretations). The stored code identifies a fault of the Cooling circuit by-pass electrovalve. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.

Is P1599 generic or manufacturer-specific?

P1599 is a manufacturer-specific code. In this database it is documented for: PSA, VAG. The same number can mean something different on other brands.

Can TuningBot remove P1599 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database