Hours: 07–23 daily
EN
Tune your file

TuningBot DTC Database · v4.37.14

P00CC Fuel Volume Regulator Solenoid Supply Voltage Control Circuit Low

Generic (OBD-II) interpretation in the TuningBot DTC database.

P · PowertrainFuelOBD2

What P00CC means

P00CC
Fuel Volume Regulator Solenoid Supply Voltage Control Circuit Low Generic · fuel Data confidence 65%

The control module detected that the signal in the Fuel Volume Regulator Solenoid Supply Voltage Control circuit stayed below the expected operating range.

Symptoms

  • Possible hard starting or long cranking
  • Possible reduced power or cutting out
  • MIL illuminated

Possible causes

  • Low-pressure fuel supply fault (pump, filter, lines)
  • High-pressure pump wear or fault
  • Pressure regulator / volume control valve fault
  • Fuel pressure sensor fault
  • Internal leakage (injector return flow too high)

Recommended checks

  • Read specified vs actual rail pressure at cranking, idle and load
  • Check low-pressure supply (pressure/volume) first
  • Check control valve/regulator operation
  • Measure injector return flow where applicable
  • Inspect wiring and connectors of pressure components

Related and nearby codes

P00 range
P0000P0001P0002P0003P0004P0005P0006P0007P0008P0009P000AP000BP000CP000DP000EP000FP0010P0011

How to read P00CC

P

Powertrain: engine, transmission and driveline systems.

0

Generic SAE-standard code: same meaning on every make.

0CC

Specific fault index within the subsystem.

Frequently asked questions about P00CC

What does P00CC mean?

Fuel Volume Regulator Solenoid Supply Voltage Control Circuit Low. The control module detected that the signal in the Fuel Volume Regulator Solenoid Supply Voltage Control circuit stayed below the expected operating range.

Is P00CC generic or manufacturer-specific?

P00CC is a generic OBD-II code: it has the same meaning on every make and model that follows the SAE standard.

Can TuningBot remove P00CC at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

Stage 1/2/3 TuningDPF RemovalEGR RemovalAdBlue / SCR RemovalDTC RemovalIMMO OFFSpeed Limiter (Vmax)

Understand the system behind this code: Diagnostic Strategy and DTC Logic

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database