ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Mercedes ML350 ECU Tuning: Stage 1 Gains by Engine
Dyno-tested Stage 1 results for every Mercedes ML350 engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.
Generations covered: ML350 W164
Stage 1 gains by engine
Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.
| Engine | Generation | Stock | HP Gain | Torque Gain | Details |
|---|
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Measured here, tunable everywhere
The Mercedes ML350 engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Mercedes ML350 or otherwise. If your engine is not on this list, upload the original file anyway.
Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.
ECU services available on Mercedes ML350
Solutions supported on the ECUs fitted to this model. Each engine page lists exactly which ones apply to its control units.
Frequently Asked Questions
Do I have to send the Mercedes ML350 ECU?
No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in 15-20 minutes to write into the car. Only the file travels.
Order your Mercedes ML350 tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23